Remington BS188A, BPS188A owner manual Replacing SAW Chain, Filing Cutter Depth Gauges

Page 17

CLEANING AND MAINTENANCE

Filing Cutter Depth Gauges

Thecutterdepthgaugeclearanceisreducedas cutters are sharpened. After every second or third sharpening, reset cutter depth gauges.

1.Place depth gauge tool (.025") firmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 34).

2.Use medium flat file. File depth gauge level with depth gauge tool.

3.Remove depth gauge tool. With flat file, round off front corner of cutter depth gauge (see Figure 35).

After several hand filings, have authorized service center or sharpening service machine sharpen chain. This will insure even filing.

Depth Gauge

Flat File

Depth Gauge

Tool

Figure 34 - Depth Gauge Tool On Chain

Front

Corner

.025"

Figure 35 - Round Off Front Corner Of Depth Gauge

REPLACING SAW CHAIN

WARNING: Remove battery from chain saw before adjusting saw chain tension. Severe injury or death could occur from body contact with moving chain.

WARNING: Cutting edges on chain are sharp. Use protective gloves when handling chain.

IMPORTANT: Do not clamp chain- saw in vise to replace saw chain or guide bar.

Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Parts List.

Refer to Figure 36 while completing the following steps.

1.Loosen and remove guide bar nuts.

2.Remove sprocket cover.

3.Remove saw chain.

4.Place new chain around drive sprocket, along top groove of guide bar, and around guide bar nose. Note: Make sure cutting edges of chain are facing in right direction. Position chain so cutting edges on top of guide bar face guide bar nose (see Figure 37 and indicator on side cover of saw).

5.Before placing sprocket cover onto guide bar bolts, verify that the adjusting nib is in the adjusting hole on the guide bar.

6.Place sprocket cover onto guide bar bolts.

7.Thread guide bar nuts onto guide bar bolts. IMPORTANT: Finger tighten only.

8.Adjust chain tension. Follow steps under Saw Chain Tension, page 12).

9.Securely tighten guide bar nuts with wrench.

Sprocket

GuideBar Bolts

Guide Bar

Saw Chain

Adjusting

Hole

Adjusting Nib

Guide Bar Nuts

 

 

Sprocket Cover

Figure 36- Guide Bar and Saw Chain Replacement

Cutting Edges

Figure 37 - Correct Installation of Saw Chain

ENGLISH

CAUTION: Do not place chain on saw backwards. If chain is back- wards, saw will vibrate badly and will not cut.

Continued

17

www.remingtonpowertools.com

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Volt Cordless Polesaw Volt Cordless Chainsaw Stop English Introduction ContentsWhile Operating SAW Important Safety InformationBefore Operating SAW Kickback Maintenance Storage of SAWGeneral Maintenance Polesaw Trimming PrecautionsService UnpackingProduct Identification Chain SAWRear Handle Handle located at rear of saw body Chain SAW Terms and Definitions10.0 Rechargeable BatterySafety Warnings Important Charging Notes Charging BatterySaw Chain Tension Adjustment Chain SAW AssemblyLoosen guide bar nuts before adjust- ing chain see Figure Chain SAW InformationBefore Felling a Tree Oiling ChainCutting with the Chain SAW Limbing a Tree Felling Procedure Felling NotchFelling Cut Cut towards notchTrimming a Tree Pruning Bucking a LOGEntire Length Of Log On Ground Log Supported On One EndAdjusting Pole Length Polesaw AssemblyPolesaw Information Cutting with the PolesawCleaning SAW Body Cleaning and MaintenanceCare of Guide BAR Sharpening SAW ChainPlace sprocket cover onto guide bar bolts Replacing SAW ChainFiling Cutter Depth Gauges See pages 43 through 44 for an Illustrated Parts List Warranty ServiceNON-WARRANTY Service Observed Fault Possible Cause Remedy TroubleshootingBox Bowling Green, KY Warranty InformationEspañol Manual Para EL UsuarioIntroducción EL Contiendo Diagnóstico Y Resolución DE ProblemasAL Utilizar LA Sierra Información Importante DE SeguridadAntes DE Utilizar LA Sierra Permanezca alerta. Utilice el sentido común ContragolpesAl cortar, no aplique gra fuerza a la sierra Cómo llevar la sierraAlmacenamiento Mantenimiento Y Almacenamiento DE SU Sierra EléctricaMantenimiento de la cadena y seguridad contra contragolpes Mantenimiento GeneralPrecauciones AL Recortar CON LA Sierra DE Pértiga DesembalajeSierra DE Cadena Identificación DEL ProductoCadena de contragolpe reducido Términos Y Definiciones DE LA Sierra DE CadenaExtremo frontal de la barra de guía Retroceso Contragolpe, PresiónAdvertencias DE Seguridad Batería RecargableTapa Protectora DEL Terminal DE LA Batería Notas Importantes Sobre LA Carga Carga DE LA BateríaTensión DE LA Sierra DE Cadena Ensamblado DE LA Sierra DE CadenaLubricación DE LA Cadena Ajuste DE Tensión DE LA Cadena SerradaRealización DE Cortes Sujete la batería a la sierraAntes de derribar un árbol AdvertenciaProcedimiento de tala Corte de la muesca Tala finalTrozado DE UN Tronco Desmembramiento DE UN ÁrbolLa totalidad del tronco sobre el suelo Tronco apoyado en un extremoDe contragolpes, lea la sección Contragolpes en la página Poda DE UN ÁrbolPodar un árbol es el proceso de cortar ramas Ensamblado DE LA Sierra DE Pértiga Información Sobre LA Sierra DE PértigaCorté CON LA Sierra DE Pértiga Regulación DE LA Longitud DE LA PértigaLimpieza DEL Cabezal Limpieza Y MantenimientoCuidado DE LA Barra DE Guía Afilado DE LA CadenaLimado de los calibradores de medida de profundidad Recambio DE LA Cadena SerradaAccesorios Y Piezas DE Repuesto Servicio TécnicoServicio DE Reparación Servicio CON GarantíaPor completo Diagnóstico Y Resolución DE ProblemasLa batería está casi descargada Garantía Estándar de la Batería Garantía EstándarGarantía Limitada Modelo Fecha de compraEspañol Illustrated Parts LIST/DESGLOSE Ilustrado DE Partes BS188A Parts LIST/LISTA DE RepuestosParts Centrals / Central DE Piesaz Page REV.B

BS188A, BPS188A specifications

The Remington BPS188A and BPS188A models represent a significant advance in the line of tactical shotguns, designed to meet the diverse demands of shooting enthusiasts and professionals alike. These models are characterized by their innovative features, robust construction, and user-friendly operation, making them ideal for both home defense and competitive shooting.

One of the standout features of the BPS188A is its pump-action mechanism, which offers reliable cycling and smooth operation. This allows for rapid follow-up shots, a crucial advantage in high-pressure scenarios. The shotgun is equipped with a 28-inch barrel that enhances accuracy while providing a good balance for handling. The barrel is manufactured from high-quality steel, ensuring durability and longevity while maintaining precision in various shooting conditions.

In terms of technology, the BPS188A integrates a dual-action bar system that ensures consistent performance, reducing the chances of jamming during operation. Additionally, the shotgun comes with an adjustable rear sight and a front bead sight, which facilitate fast target acquisition and improved aiming capability, crucial for effective shooting under varied conditions.

The BPS188A is designed with user comfort in mind. It features a synthetic stock and forend, which are resistant to weather effects and provide enhanced grip, even in wet conditions. The shotgun also has an ergonomic design that allows for comfortable handling and control, making it suitable for extended shooting sessions.

A notable characteristic of the BPS188A is its versatility. The shotgun is compatible with various ammunition types, ranging from birdshot to slugs, allowing users to customize their loadout based on specific needs or preferences. This flexibility makes it an excellent choice for diverse shooting applications, whether for sport or tactical scenarios.

In terms of safety, the BPS188A incorporates a cross-bolt safety mechanism, which is easily accessible and serves as an added layer of security against accidental discharges. The shotgun's overall build quality reflects Remington's commitment to craftsmanship, with every component engineered to ensure reliability and performance.

Overall, the Remington BPS188A and BPS188A are exemplary tactical shotguns that combine advanced features, comfortable design, and reliable performance. These models cater to a wide range of shooting applications, making them a valuable addition to any firearm enthusiast's collection. Whether for personal defense or recreational shooting, the BPS188A stands poised to deliver exceptional service and satisfaction.
Top Page Image Contents