Remington BPS188A, BS188A owner manual Warranty Service, NON-WARRANTY Service

Page 18

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Remove battery from chain saw.

2.Charge battery completely. Note: It could take up to 9 hours to complete- ly charge the battery.

3.When battery is completely charged, remove from charger and put protec- tive cap on battery terminals.

IMPORTANT: To prolong battery life, avoid leaving battery on charger for extended periods of time (over 30 days without use).

4.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

5.Dry guide bar and chain.

6.Place chain in container filled with oil. This will prevent rust.

7.Wipe a thin coating of oil over sur- face of guide bar.

8.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

9.Store chain saw and battery

•in a high or locked place, out of chil- dren’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

TECHNICAL SERVICE

You may have further questions aboutassem- bling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www.remingtonpowertools.com or contact our Technical Service Department at 1-800-626-2237 (English Only). You may also write to:

DESA Power Tools

P.O. Box 90004

Bowling Green, KY 42102-9004

ATTN: Technical Service

When contacting DESA Power Tools, have ready:

•Your Name

•Your Address

•Your Phone Number

•Model Number of Product

•Date of Purchase (Include copy of re- ceipt for written requests).

REPLACEMENT PARTS AND ACCESSORIES

WARNING: Use only replace- ment parts and accessories de- scribed in this manual. Use of other parts or accessories could damage saw or injure operator.

For original replacement parts and acces- sories, contact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 45 . Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated. You may also order parts from the "Online Outlet" at www.remingtonpowertools.com.

See pages 43 through 44 for an Illustrated Parts List.

If you need additional referral information, contact our Technical Service Department (see Technical Service).

REPAIR SERVICE

Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

WARRANTY SERVICE

If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.

NON-WARRANTY SERVICE

If product requires service, return it to nearest Authorized Service Center. Repairs will be billed to you at regular repair list prices.

For additional Service Center or warranty information, call 1-800-626-2237 or visit our Technical Service web site at www. remingtonpowertools.com.

We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied.

BATTERY DISPOSAL AND RECYCLING

This product uses nickel-cadnium bateries. Local, state, or federal laws may prohibit disposal of nickel-cadnium batteries in the ordinary trash.

To help protect the environment and con- serve natural resources, please dispose of batteries properly. You may contact your local recycling center for information on where to drop off the batteries.

www.remingtonpowertools.com

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Volt Cordless Polesaw Volt Cordless Chainsaw Stop Introduction Contents EnglishImportant Safety Information Before Operating SAWWhile Operating SAW Maintenance Storage of SAW KickbackService Polesaw Trimming PrecautionsGeneral Maintenance UnpackingChain SAW Product IdentificationChain SAW Terms and Definitions Rear Handle Handle located at rear of saw bodyRechargeable Battery Safety Warnings10.0 Charging Battery Important Charging NotesLoosen guide bar nuts before adjust- ing chain see Figure Chain SAW AssemblySaw Chain Tension Adjustment Chain SAW InformationOiling Chain Cutting with the Chain SAWBefore Felling a Tree Felling Cut Felling Procedure Felling NotchLimbing a Tree Cut towards notchEntire Length Of Log On Ground Bucking a LOGTrimming a Tree Pruning Log Supported On One EndPolesaw Information Polesaw AssemblyAdjusting Pole Length Cutting with the PolesawCare of Guide BAR Cleaning and MaintenanceCleaning SAW Body Sharpening SAW ChainReplacing SAW Chain Filing Cutter Depth GaugesPlace sprocket cover onto guide bar bolts Warranty Service NON-WARRANTY ServiceSee pages 43 through 44 for an Illustrated Parts List Troubleshooting Observed Fault Possible Cause RemedyWarranty Information Box Bowling Green, KYManual Para EL Usuario EspañolDiagnóstico Y Resolución DE Problemas Introducción EL ContiendoInformación Importante DE Seguridad Antes DE Utilizar LA SierraAL Utilizar LA Sierra Al cortar, no aplique gra fuerza a la sierra ContragolpesPermanezca alerta. Utilice el sentido común Cómo llevar la sierraMantenimiento de la cadena y seguridad contra contragolpes Mantenimiento Y Almacenamiento DE SU Sierra EléctricaAlmacenamiento Mantenimiento GeneralDesembalaje Precauciones AL Recortar CON LA Sierra DE PértigaIdentificación DEL Producto Sierra DE CadenaExtremo frontal de la barra de guía Términos Y Definiciones DE LA Sierra DE CadenaCadena de contragolpe reducido Retroceso Contragolpe, PresiónBatería Recargable Tapa Protectora DEL Terminal DE LA BateríaAdvertencias DE Seguridad Carga DE LA Batería Notas Importantes Sobre LA CargaEnsamblado DE LA Sierra DE Cadena Tensión DE LA Sierra DE CadenaRealización DE Cortes Ajuste DE Tensión DE LA Cadena SerradaLubricación DE LA Cadena Sujete la batería a la sierraProcedimiento de tala Corte de la muesca AdvertenciaAntes de derribar un árbol Tala finalLa totalidad del tronco sobre el suelo Desmembramiento DE UN ÁrbolTrozado DE UN Tronco Tronco apoyado en un extremoPoda DE UN Árbol Podar un árbol es el proceso de cortar ramasDe contragolpes, lea la sección Contragolpes en la página Información Sobre LA Sierra DE Pértiga Ensamblado DE LA Sierra DE PértigaRegulación DE LA Longitud DE LA Pértiga Corté CON LA Sierra DE PértigaCuidado DE LA Barra DE Guía Limpieza Y MantenimientoLimpieza DEL Cabezal Afilado DE LA CadenaRecambio DE LA Cadena Serrada Limado de los calibradores de medida de profundidadServicio DE Reparación Servicio TécnicoAccesorios Y Piezas DE Repuesto Servicio CON GarantíaDiagnóstico Y Resolución DE Problemas La batería está casi descargadaPor completo Garantía Limitada Garantía EstándarGarantía Estándar de la Batería Modelo Fecha de compraEspañol Illustrated Parts LIST/DESGLOSE Ilustrado DE Partes Parts LIST/LISTA DE Repuestos BS188AParts Centrals / Central DE Piesaz Page REV.B

BS188A, BPS188A specifications

The Remington BPS188A and BPS188A models represent a significant advance in the line of tactical shotguns, designed to meet the diverse demands of shooting enthusiasts and professionals alike. These models are characterized by their innovative features, robust construction, and user-friendly operation, making them ideal for both home defense and competitive shooting.

One of the standout features of the BPS188A is its pump-action mechanism, which offers reliable cycling and smooth operation. This allows for rapid follow-up shots, a crucial advantage in high-pressure scenarios. The shotgun is equipped with a 28-inch barrel that enhances accuracy while providing a good balance for handling. The barrel is manufactured from high-quality steel, ensuring durability and longevity while maintaining precision in various shooting conditions.

In terms of technology, the BPS188A integrates a dual-action bar system that ensures consistent performance, reducing the chances of jamming during operation. Additionally, the shotgun comes with an adjustable rear sight and a front bead sight, which facilitate fast target acquisition and improved aiming capability, crucial for effective shooting under varied conditions.

The BPS188A is designed with user comfort in mind. It features a synthetic stock and forend, which are resistant to weather effects and provide enhanced grip, even in wet conditions. The shotgun also has an ergonomic design that allows for comfortable handling and control, making it suitable for extended shooting sessions.

A notable characteristic of the BPS188A is its versatility. The shotgun is compatible with various ammunition types, ranging from birdshot to slugs, allowing users to customize their loadout based on specific needs or preferences. This flexibility makes it an excellent choice for diverse shooting applications, whether for sport or tactical scenarios.

In terms of safety, the BPS188A incorporates a cross-bolt safety mechanism, which is easily accessible and serves as an added layer of security against accidental discharges. The shotgun's overall build quality reflects Remington's commitment to craftsmanship, with every component engineered to ensure reliability and performance.

Overall, the Remington BPS188A and BPS188A are exemplary tactical shotguns that combine advanced features, comfortable design, and reliable performance. These models cater to a wide range of shooting applications, making them a valuable addition to any firearm enthusiast's collection. Whether for personal defense or recreational shooting, the BPS188A stands poised to deliver exceptional service and satisfaction.
Top Page Image Contents