Remington BS188A, BPS188A owner manual Rechargeable Battery, Safety Warnings, 10.0

Page 9

RECHARGEABLE BATTERY

PROTECTIVE BATTERY TERMINAL CAP

WARNING: Do not store or carry battery so that metal objects can contact exposed battery ter- minals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, jewelry etc. without battery cap.

A protective battery terminal cap is provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool.

SAFETY WARNINGS

1.This manual contains important safe- ty and operating instructions.

2.Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack.

CAUTION: To reduce the risk of injury, charge only Remington brand batteries. Other types of bat- teries may burst causing personal injury and damage.

3.Do not expose charger to rain or snow.

4.Use of an attachment not recommended or sold by Remington brand may result in a risk of fire, electric shock, or injury to persons.

5.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

6.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could re- sult in a risk of fire, electric shock or electrocution.

a.Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension cords should be used, and we recommend that they be listed by Underwriters Laboratories (U.L.). If the extension is to be used outside, the cord must be suitable for outdoor use. Any cord marked for outdoor use can also be used for indoor work. The letters “W” or “WA” on the cord jacket indicate that the cord is suitable for outdoor use.

b.An extension cord must have ad- equate wire size (AWG or American Wire Gauge) for safety, and to pre- vent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each exten- sion contains at least the minimum wire size.

CHART FOR MINIMUM WIRE SIZE (AWG) OF EXTENSION CORDS NAMEPLATE RATING AMPS – 0

– 10.0

Cord

AWG Cord

Length

Size

 

 

25 feet

18 AWG

 

 

50 feet

18 AWG

 

 

100 feet

16 AWG

 

 

150 feet

14 AWG

 

 

7. Use only the supplied charger (P/

N 121397-01)when charging. The use of any other charger could dam- age the battery or create a hazardous condition.

8.Use only one charger when charging.

9.Use only Remington RB18V OR RBE18V battery packs with this product.

10.Do not attempt to open the charger. There are no customer serviceable parts inside. If damaged, call DESA Power Tools Technical Service.

11.DO NOT incinerate the battery pack even if they are severely damaged or completely worn out. The batteries can explode in a fire.

12.A small leakage of liquid from the battery pack cells may occur under extreme usage, charging, or tempera- ture conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage gets on your skin:

• Wash quickly with soap and water.

• Neutralize with a mild acid such as lemon juice or vinegar.

• If the battery liquid gets in your eyes, flush them with clean water for a minimum of 10 minutes and seek immediate medical attention.

MEDICAL NOTE: The liquid is a 25-35% solution of potassium hydroxide.

ENGLISH

9

www.remingtonpowertools.com

Image 9
Contents Volt Cordless Polesaw Volt Cordless Chainsaw Stop English Introduction ContentsImportant Safety Information Before Operating SAWWhile Operating SAW Kickback Maintenance Storage of SAWGeneral Maintenance Polesaw Trimming PrecautionsService UnpackingProduct Identification Chain SAWRear Handle Handle located at rear of saw body Chain SAW Terms and DefinitionsRechargeable Battery Safety Warnings10.0 Important Charging Notes Charging BatterySaw Chain Tension Adjustment Chain SAW AssemblyLoosen guide bar nuts before adjust- ing chain see Figure Chain SAW InformationOiling Chain Cutting with the Chain SAWBefore Felling a Tree Limbing a Tree Felling Procedure Felling NotchFelling Cut Cut towards notchTrimming a Tree Pruning Bucking a LOGEntire Length Of Log On Ground Log Supported On One EndAdjusting Pole Length Polesaw AssemblyPolesaw Information Cutting with the PolesawCleaning SAW Body Cleaning and MaintenanceCare of Guide BAR Sharpening SAW ChainReplacing SAW Chain Filing Cutter Depth GaugesPlace sprocket cover onto guide bar bolts Warranty Service NON-WARRANTY ServiceSee pages 43 through 44 for an Illustrated Parts List Observed Fault Possible Cause Remedy TroubleshootingBox Bowling Green, KY Warranty InformationEspañol Manual Para EL UsuarioIntroducción EL Contiendo Diagnóstico Y Resolución DE ProblemasInformación Importante DE Seguridad Antes DE Utilizar LA SierraAL Utilizar LA Sierra Permanezca alerta. Utilice el sentido común ContragolpesAl cortar, no aplique gra fuerza a la sierra Cómo llevar la sierraAlmacenamiento Mantenimiento Y Almacenamiento DE SU Sierra EléctricaMantenimiento de la cadena y seguridad contra contragolpes Mantenimiento GeneralPrecauciones AL Recortar CON LA Sierra DE Pértiga DesembalajeSierra DE Cadena Identificación DEL ProductoCadena de contragolpe reducido Términos Y Definiciones DE LA Sierra DE CadenaExtremo frontal de la barra de guía Retroceso Contragolpe, PresiónBatería Recargable Tapa Protectora DEL Terminal DE LA BateríaAdvertencias DE Seguridad Notas Importantes Sobre LA Carga Carga DE LA BateríaTensión DE LA Sierra DE Cadena Ensamblado DE LA Sierra DE CadenaLubricación DE LA Cadena Ajuste DE Tensión DE LA Cadena SerradaRealización DE Cortes Sujete la batería a la sierraAntes de derribar un árbol AdvertenciaProcedimiento de tala Corte de la muesca Tala finalTrozado DE UN Tronco Desmembramiento DE UN ÁrbolLa totalidad del tronco sobre el suelo Tronco apoyado en un extremoPoda DE UN Árbol Podar un árbol es el proceso de cortar ramasDe contragolpes, lea la sección Contragolpes en la página Ensamblado DE LA Sierra DE Pértiga Información Sobre LA Sierra DE PértigaCorté CON LA Sierra DE Pértiga Regulación DE LA Longitud DE LA PértigaLimpieza DEL Cabezal Limpieza Y MantenimientoCuidado DE LA Barra DE Guía Afilado DE LA CadenaLimado de los calibradores de medida de profundidad Recambio DE LA Cadena SerradaAccesorios Y Piezas DE Repuesto Servicio TécnicoServicio DE Reparación Servicio CON GarantíaDiagnóstico Y Resolución DE Problemas La batería está casi descargadaPor completo Garantía Estándar de la Batería Garantía EstándarGarantía Limitada Modelo Fecha de compraEspañol Illustrated Parts LIST/DESGLOSE Ilustrado DE Partes BS188A Parts LIST/LISTA DE RepuestosParts Centrals / Central DE Piesaz Page REV.B

BS188A, BPS188A specifications

The Remington BPS188A and BPS188A models represent a significant advance in the line of tactical shotguns, designed to meet the diverse demands of shooting enthusiasts and professionals alike. These models are characterized by their innovative features, robust construction, and user-friendly operation, making them ideal for both home defense and competitive shooting.

One of the standout features of the BPS188A is its pump-action mechanism, which offers reliable cycling and smooth operation. This allows for rapid follow-up shots, a crucial advantage in high-pressure scenarios. The shotgun is equipped with a 28-inch barrel that enhances accuracy while providing a good balance for handling. The barrel is manufactured from high-quality steel, ensuring durability and longevity while maintaining precision in various shooting conditions.

In terms of technology, the BPS188A integrates a dual-action bar system that ensures consistent performance, reducing the chances of jamming during operation. Additionally, the shotgun comes with an adjustable rear sight and a front bead sight, which facilitate fast target acquisition and improved aiming capability, crucial for effective shooting under varied conditions.

The BPS188A is designed with user comfort in mind. It features a synthetic stock and forend, which are resistant to weather effects and provide enhanced grip, even in wet conditions. The shotgun also has an ergonomic design that allows for comfortable handling and control, making it suitable for extended shooting sessions.

A notable characteristic of the BPS188A is its versatility. The shotgun is compatible with various ammunition types, ranging from birdshot to slugs, allowing users to customize their loadout based on specific needs or preferences. This flexibility makes it an excellent choice for diverse shooting applications, whether for sport or tactical scenarios.

In terms of safety, the BPS188A incorporates a cross-bolt safety mechanism, which is easily accessible and serves as an added layer of security against accidental discharges. The shotgun's overall build quality reflects Remington's commitment to craftsmanship, with every component engineered to ensure reliability and performance.

Overall, the Remington BPS188A and BPS188A are exemplary tactical shotguns that combine advanced features, comfortable design, and reliable performance. These models cater to a wide range of shooting applications, making them a valuable addition to any firearm enthusiast's collection. Whether for personal defense or recreational shooting, the BPS188A stands poised to deliver exceptional service and satisfaction.