Kickback Safety Devices On This Saw

IMPORTANT SAFETY INFORMATION

Continued

12.Do not force chain saw while cutting. Apply light pressure. It will do the job better and safer at the rate for which it was intended.

13.When cutting limb or tree trunk that is under ten- sion, use extreme caution. Be alert for wood springing back. When wood tension is released, limb could spring back and strike operator caus- ing severe injury or death.

14.Carry Pole Saw from one place to another

¥with unit unplugged

¥with telescoping pole returned to shortest po- sition

¥by holding pole at balance point (close to saw end)

¥with guide bar and chain to rear

15.Do not cut small brush and saplings with the Pole Saw. Use the chain saw only, with extreme care. Slender matter may catch in the chain and be whipped toward you. This could also pull you off balance.

WARNING: This product contains chemicals known to the State of Califor- nia to cause cancer or birth defects, or other reproductive harm.

WARNING: Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities contains chemicals known (to the state of California) to cause cancer, birth de- fects, or other reproductive harm. Some examples of these chemicals are:

¥lead from lead-based paints

¥crystalline silica from bricks and ce- ment and other masonry products

¥arsenic and chromium from chemi- cally-treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well venti- lated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

KICKBACK

WARNING:Kickbackmayoccurwhen the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a light- ning fast reverse reaction, kicking the guide bar up and back towards the opera- tor. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious injury to user.

This saw has a low-kickback chain and reduced kick- back guide bar. Both items reduce the chance of kick- back. Kickback can still occur with this saw.

The following steps will reduce the risk of kickback.

¥Use both hands - one gripping the handle and the other gripping the pole. Use Þrm grip. Thumbs and Þngers must wrap around pole and handle.

¥Keep all safety items in place on saw. Make sure they work properly.

¥Do not overreach or extend arms above shoulder height.

¥Keep solid footing and balance at all times.

¥Never try cutting through two branches at the same time. Only cut one at a time.

¥Do not bury guide bar nose or try plunge cut (bor- ing into wood using guide bar nose).

¥Watch for shifting of wood or other forces that may pinch chain.

¥Use extreme caution when reentering a previous cut.

¥Use low-kickback chain and guide bar supplied with the chain saw. Only use replacement parts listed for the pole saw.

¥Never use dull or loose chain. Keep chain sharp with proper tension.

Saw Maintenance and Kickback Safety

Follow maintenance instructions in the chain saw manual. Proper cleaning of saw and chain and guide bar maintenance can reduce chances of kickback. In- spect and maintain saw after each use. This will in- crease the service life of your saw. Note: Even with proper sharpening, risk of kickback can increase with each sharpening.

Continued

108540	3	www.desatech.com
	3

RPS 96: 104317, 106821 specifications

The Remington 106821 and RPS 96: 104317 represent a fusion of advanced engineering and practical design, catering to the needs of firearm enthusiasts and professionals alike. These models illustrate Remington's commitment to quality, performance, and reliability in the firearms sector.

The Remington 106821, often regarded as a classic in the brand's lineup, features a robust construction that ensures durability through extended use. This model is equipped with a precision-engineered barrel that enhances accuracy while maintaining a lightweight feel, making it an ideal choice for both beginners and seasoned shooters. The ergonomic design of the stock contributes to a comfortable grip, allowing for better control and handling during operations. This model also incorporates advanced rifling technology, which improves bullet stability and reduces wear over time.

On the other hand, the RPS 96: 104317 is known for its versatility across various shooting scenarios. It boasts an adjustable gas system, enabling shooters to fine-tune the firearm based on specific ammunition and conditions. This flexibility not only improves performance but also helps in minimizing recoil, making it easier to manage during rapid-fire situations. The RPS 96: 104317 features a modular design that allows for easy customization and upgrades, appealing to those who like to tailor their firearm to their exact preferences.

Both models incorporate cutting-edge safety features, such as integrated trigger locks and manual safety mechanisms, ensuring user protection and preventing accidental discharges. The Remington 106821 and RPS 96: 104317 are crafted using high-grade materials that enhance longevity without compromising weight, thus making them suitable for extended periods of use in various environments, whether on the range or in the field.

In summary, the Remington 106821 and RPS 96: 104317 exemplify the brand's dedication to innovation in firearms technology. With features that emphasize accuracy, comfort, and safety, these models provide an exceptional shooting experience tailored to the demands of modern firearms users. Both firearms embody the craftsmanship and attention to detail that has become synonymous with the Remington name, ensuring they remain popular choices in the competitive firearms market.