Site Preparation, Care & USE | Rubbermaid 5L20 specs

CAUTIONS

CAUTION: Always use gloves when using a utility knife.

CAUTION: Always use eye protection/safety glasses during assembly.

CAUTION: When installing screws, do not overtighten.

CAUTION: Drill only through initial panel wall, unless otherwise indicated.

CARE & USE

•Shed can be cleaned with water and mild detergent as necessary. DO NOT USE ABRASIVE DETERGENTS,

•To maximize your shed’s performance, remove excessive snow and/or leaf accumulation from the roof.

•In the event of severe weather, please disassemble and store in a secure location.

FLOOR PLAN:

Size the construction site to fit the entire floor.

If desired, recessed anchor locations (8 places)

can be used to anchor the shed floor to a foundation after you have constructed one.

~3-5/8 " 24 " 24 " ~3-5/8 " ~4-15/16 "

~23-9/16"

~51-1/2 "

51½"

55¼"

Build a solid, level surface for the shed foundation. Consult your local	~5 "	~55-1/4"

building authority for ordinances, restrictions, or permits required		120.0°
before building any structure at your home.
	24-7/8"	Maximum opening
Note: Minimum dimensions for foundations shown.