Simplicity 1694924 manual Install the Deflector Hinge, Bracket and Deflector

Install the Deflector Hinge, Bracket and Deflector

1.Slide the deflector support rod (A, Figure 5) into pivot bracket (B) as shown.

2.Secure the front of the pivot bracket (B) using 5/16-18 x 3/4 carriage bolt and 5/16-18 nut (F).

3.38” Mowers - Secure the back of pivot bracket (B) and support (G) using 5/16-18 x 3/4 carriage bolt and 5/16-18 nut (F).

44” and 50” Mowers - Secure the back of pivot bracket (B) and support (G) using 5/16-18 x 7/8 capscrew, 5/16 washer (E) and 5/16-18 nut (F).

4.Drill four 13/64” holes from the bottom of the deflector (A, Figure 6) at the pre-molded drill hole locations (E).

5.Attach the deflector (A) to the rod (D) using the #10-24 screws (B) and #10-24 nuts (C).

	G
F	F
A
B	Assembly
	E
	D
C

Figure 5. Install Deflector Hinge and Bracket

A.Deflector Support Rod

B.Pivot Bracket

C.Carriage Bolts, 5/16-18 x 3/4

D.Capscrew, 5/16-18 x 7/8

E.Washer, Flat, 5/16

F.Nut, Whizlock, 5/16-18

G.Support, Belt Cover

	C
	D
	E
	C
A
	E
B	B

Figure 6. Install Deflector

A.Deflector

B.Screws, Phillips, #10-24 x 3/4

C.Nuts, Nylock, #10-24

D.Rod, Deflector

E.13/64” Hole Locations

9