Simplicity 1694924 manual Safety Decals, Safety Icons, Hazard Safety Icon

Page 4

Safety Decals

This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your unit should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your unit.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

Safety Icons

The alert symbol is used to identity safety information about hazards that can result in personal injury. A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of the injury. In addition, a hazard icon may be used to represent the type of hazard. An explanation of hazard levels and icons are as follows:

DANGER

This indicates a hazard which, if not avoided, will result in serial injury or death.

WARNING

This indicates a hazard which, if not avoided, could result in serial injury or death.

CAUTION

This indicates a hazard which, if not avoided, might result in minor or moderate injury.

CAUTION or NOTICE

These messages presented without the alert symbol indicate a situation where the unit or property could be damaged.

Safety

DANGER

Amputation and

thrown objects hazard

To avoid injury from rotating blades and thrown debris, stay clear of deck edge and discharge. Do not mow without deflector or entire grass catcher in place.

1700259

Decal - Danger, Thrown Objects / Rotating Blades, Part No. 1700259

Decal - Warning, Shield Placement / Deflector Position, Part No. 1717291

Hazard Safety Icon

Amputation

- Rotating

Parts

Thrown

Objects

3

Image 4
Contents OPERATOR’S Manual Table of Contents Safety PreparationSafety Icons Safety DecalsHazard Safety Icon Identification Numbers Attachment Identification DataInitial Assembly Cover Flange Qty Description Install the Discharge Baffle Remove Deflector and Arbor Cover All ModelsInstall the Deflector Hinge, Bracket and Deflector Install Idler Assembly and Belt Guide Discard Taptite ScrewsInstall the Turbo Drive Pulley Remove Hardware Locknut Spring Washers Pulley SpacerInstall Up-Stop 38 Mowers Install Deflector LatchInstall Turbo Belt and Mounting Latch Mounting Latch HolesInstall Turbo, Belt and Roller Install Seal, Cover, tubes and Turbo OnlyAssembly Triple Collector Plate and Edging Twin Collectors EdgingInstall Thick Seal Edge of Thin Seal Snapper ModelsInstall Set Collar Lift Rod Set Screw Rod Tip Normal Remocal & Installation Normal Removal & InstallationTurbo & Tube Installation Normal Remocal InstallationTurbo & Tube Removal