Simplicity 1694924 manual Install Turbo Belt and Mounting Latch, Mounting Latch Holes

Install Turbo Belt and Mounting Latch

1.Select the correct belt for the mower deck used. See parts listing on page 6-7. Loosen the hardware securing the drive pulley belt guide (B, Figure 17 or 18) and the idler pulley (C).

2.Install the belt as shown in Figure 17 or 18.

3.Tighten the hardware securing the drive pulley belt guide (B, Figure 17 or 18) and the idler pulley (C) so the idler belt guide is within 1/16” (1.59mm) of the belt.

4.Remove and retain hardware (D, Figure 17 or 18). See Figure 16 for hole location. Install the mounting latch (A, Figure 17 or 18) reusing hardware (D). Latch may have to be repositioned later.

38” Mounting Hole Location

44” & 50” Mounting Hole Location

Figure 16. Mounting Latch Holes

B

C

D

DA

Figure 17. Belt Routing - 38” Models

A.Mounting Latch

B.Drive Pulley Belt Guide Hardware

C.Idler Pulley

D.Hardware

B

C

D

DA

Figure 18. Belt Routing - 44” and 50” Models

A.Mounting Bracket

B.Drive Pulley Belt Guide Hardware

C.Idler Pulley

D.Hardware

Assembly

13