Simplicity 1694924 manual Install Up-Stop 38 Mowers, Install Deflector Latch

A

B

Assembly

Bracket (F) mounts to Baffle Bracket on 44” & 50” Mowers

F

C

D

A

B

Figure 13. Install Up-Stop

A.Up-Stop

B.Capscrew, Taptite, 5/16-18 x 5/8

Install Up-Stop - 38” Mowers

1.Install the up-stop (A, Figure 13) securing with 5/16-18 x 5/8 capscrew (B) as shown.

Install Deflector Latch - 38”

Note: The 44” & 50” deflector latch is typically per assembled and attached to the deflector bracket.

Check that the deflector latch stack-up is correct. See Figure 14. If necessary revise stack-up as follows:

44” and 50” Mowers - Insert 5/16-18 x 2-1/2 capscrew (H) into bracket (F). Install 5/16 washer (C), spring latch (E), 5/16-18 nut (D), 5/16 washer, 5/16-18 wingnut (B) and 5/16 nylock nut (A) onto capscrew (H) as shown.

38” Mowers - Slide 5/16 washer (C), spring latch (E) onto 5/16-18 x 2-1/2 capscrew (H). Install bracket (G) 5/16-18 nut (D), 5/16 washer, 5/16-18 wingnut (B) and 5/16 nylock nut (A) onto capscrew (H) as shown to make deflector latch assembly.

1.Install the deflector latch assembly (A, Figure 15) to existing holes (C) securing with 5/16-18 x 5/8 capscrews (B).

C E

H G

Bracket (G) mounts to Mower Deck on 38” Mowers

Figure 14. Deflector Latch Stack-Up

A.Nut, Nylock 5/16-18

B.Wingnut, Special, 5/16-18

C.Washers, Flat, 5/16

D.Nut, KEPS Lock, 5/16-18

E.Spring Latch

F.Bracket, Latch, 44” and 50” Mowers

G.Bracket, Latch, 38” Mowers

H.Capscrew, 5/16-18 x 2-1/2

B

A

C

Figure 15. Install Deflector Latch Assembly - 38” Mower

A.Defector Latch Assembly

B.Capscrews, Taptite, 5/16-18 x 5/8

C.Existing Holes in Mower Deck

12www.SimplicityMfg.com www.MasseyLawn.com www.AGCOLawn.com www.Snapper.com