50" Only |
44" Only |
C |
B |
D |
A |
E |
F |
Figure 23. Install Belt Cover Plate
A.Belt Latch
B.Belt Cover
C.5/16-18 x 1 Capscrew
D.5/16 Washer
E.Support Bracket
F.5/16-18, Nut, Nylock
10.44 and 50” Models - Attach the belt cover (B, Figure 23) to support bracket (E) securing with
CAUTION
Before you begin operating the unit with the Turbo attached, be certain you have read all of the safety information in this Operator’s Manual, as well as the Operator’s Manual for the tractor and any grass catchers or other collection devices used in conjunction with this turbo blower.
Install Seal, Cover, tubes and Turbo
1.Use cover plate (A, Figure 23) as a template to drill six 13/64” holes (C) on grass catcher cover (B) as shown.
2.Inside grass catcher cover (B, Figure 25) place seal (D), and cover plate (A). Secure using #10- 24 x 3/4 screws (C), and
| B |
| C |
| C |
A | Assembly |
| |
| C |
Figure 24. Drill Adapter Plate Holes
A.Cover Plate
B.Grass Catcher Cover
C.New13/64” Hole Locations
| A |
B | E |
| B |
C |
|
| E |
| D |
C |
|
C |
|
Figure 25. Install Seal and Cover Plate
A.Cover Plate
B.Grass Catcher Cover
C.Screw, Phillips, #10-24 x 3/4
D.Seal, Rubber
E.Locknuts, ESNA, #10-24
15