Husqvarna 327R Sharpening grass cutters and grass blades, Sharpening the saw blade, General rules

Page 11

GENERAL SAFETY PRECAUTIONS

General rules

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Keep the teeth of the blade correctly sharpened! Follow our instructions and use the recommended file gauge. An incorrectly sharpened or damaged blade increases the risk of accidents.

Keep the correct setting on the saw blade! Follow our instructions and use the recommended setting tool. An incorrectly set saw blade increases the risk of jamming and blade thrust, and damage to the saw blade.

Check the cutting attachment for damage or cracks. A damaged cutting attachment should always be replaced.

Sharpening grass cutters and grass blades

•See the cutting attachment packaging for correct sharpening instructions. Sharpen blades and cutters using a single-cut flat file.

•Sharpen all edges equally to maintain the balance of the blade.

WARNING! Always discard a blade that is

! bent, twisted, cracked, broken or damaged in any other way. Never attempt to straighten a twisted blade so that it can be reused. Only use original blades of the specified type.

Sharpening the saw blade

•See the cutting attachment packaging for correct sharpening instructions.

A correctly sharpened blade is essential for working efficiently and to avoid unnecessary wear to the blade and brush cutter.

•Make sure that the blade is well supported when you file it. Use a 5.5 mm round file with a file holder.

•The filing angle is 15°. File alternate teeth to the right and those in between to the left. If the blade has been heavily pitted by stones it may be necessary to dress the top edges of the teeth with a flat file, in exceptional cases. If so, this should be done before filing with a

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 323RII 327RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the brush cutter? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentVibration damping system Stop switchCutting attachment guard Muffler Quick releaseCutting equipment Cutting equipmentLocking nut General rules Sharpening grass cutters and grass bladesSharpening the saw blade Trimmer head Fitting the handlebar 327Rx, 327RDx AssemblyFitting the handlebar 323RII Dismantling AssemblyAssembling and dismantling the two-piece shaft 327RDx Fit the nut G. The nut must be tightened to a torque Assembling the cutting equipmentFitting other guards and cutting attachments Correct height Adjusting the harness and brush cutterStandard harness Spreading the load on your shouldersFuel Fuel safetyFuel Handling Mixing FuelingStarting Starting and StoppingCheck before starting Starting and stoppingStarter cord around your hand For throttle handles with a start throttle lockStopping ABC of clearing Basic safety rulesWorking Techniques General working instructionsForestry clearing using a saw blade Brush cutting with a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeCarburetor MaintenanceRemember the risk of fire MufflerCooling system Two-piece shaft 327RDx Cleaning the air filterBevel gear Air filterSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Page Original instructions 1153290-95
Top Page Image Contents