Husqvarna manual Assembly, Fitting the handlebar 323RII, Fitting the handlebar 327Rx, 327RDx

Page 13

ASSEMBLY

Fitting the handlebar (323RII)

•Remove the screw at the rear of the throttle handle.

•Slide the throttle handle onto the right side of the handlebar, (see diagram).

•Align the screw hole in the throttle handle with the hole in the handlebar.

•Reﬁt the screw in the hole in the rear of the throttle handle.

•Screw the screw through the handle and handlebar. Tighten it.

•Unscrew the knob from the handlebar mounting.

•Position the handlebar as shown. Fit the mounting components and tighten the knob lightly.

•Put on the harness and hang the machine from the support hook. Now make a ﬁnal adjustment so that

the machine is in a comfortable working position when it hangs from the harness. Tighten the knob.

Fitting the handlebar (327Rx, 327RDx)

•Remove the screw at the rear of the throttle handle.

•Slide the throttle handle onto the right side of the handlebar, (see diagram).

•Align the screw hole in the throttle handle with the hole in the handlebar.

•Reﬁt the screw in the hole in the rear of the throttle handle.

•Screw the screw through the handle and handlebar. Tighten it.

•Unscrew the knob from the handlebar mounting.

English – 13

Image 13

Contents 323RII 327RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the brush cutter? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system Mufﬂer Quick release Locking nut Cutting equipment Cutting equipment Sharpening the saw blade Sharpening grass cutters and grass bladesGeneral rules Trimmer head Fitting the handlebar 323RII AssemblyFitting the handlebar 327Rx, 327RDx Assembling and dismantling the two-piece shaft 327RDx AssemblyDismantling Fit the nut G. The nut must be tightened to a torque Assembling the cutting equipmentFitting other guards and cutting attachments Standard harness Adjusting the harness and brush cutterSpreading the load on your shoulders Correct heightFuel Handling Fuel safetyFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping For throttle handles with a start throttle lockStarter cord around your hand Working Techniques Basic safety rulesGeneral working instructions ABC of clearingForestry clearing using a saw blade Brush cutting with a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeCarburetor MaintenanceCooling system MufﬂerRemember the risk of ﬁre Bevel gear Cleaning the air ﬁlterAir ﬁlter Two-piece shaft 327RDxSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Page Original instructions 1153290-95