Husqvarna 327RD manual Spark plug

Page 29

MAINTENANCE

Spark plug

The spark plug condition is inﬂuenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air ﬁlter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difﬁculties.

If the machine is low on power, difﬁcult to start or runs poorly at idle speed: always check the spark plug ﬁrst before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/ cylinder.

Note:

Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not speciﬁcally recommended by HUSQVARNA.

English – 29

Image 29

Contents 323RII 327RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the brush cutter? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentVibration damping system Stop switchCutting attachment guard Mufﬂer Quick releaseCutting equipment Cutting equipmentLocking nut General rules Sharpening grass cutters and grass bladesSharpening the saw blade Trimmer head Fitting the handlebar 327Rx, 327RDx AssemblyFitting the handlebar 323RII Dismantling AssemblyAssembling and dismantling the two-piece shaft 327RDx Fit the nut G. The nut must be tightened to a torque Assembling the cutting equipmentFitting other guards and cutting attachments Standard harness Adjusting the harness and brush cutterSpreading the load on your shoulders Correct heightFuel Fuel safetyFuel Handling Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStarter cord around your hand For throttle handles with a start throttle lockStopping Working Techniques Basic safety rulesGeneral working instructions ABC of clearingForestry clearing using a saw blade Brush cutting with a saw blade Grass trimming with a trimmer head Grass clearing using a grass blade Carburetor MaintenanceRemember the risk of ﬁre MufﬂerCooling system Bevel gear Cleaning the air ﬁlterAir ﬁlter Two-piece shaft 327RDxSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Page Original instructions 1153290-95