Ryobi P2001 Operation, Attaching Grass Deflector, To Remove Battery Pack, Telescoping Boom

Page 10

ASSEMBLY

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.

ATTACHING GRASS DEFLECTOR

See Figure 2 - 3.

WARNING:

The string cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can result in serious personal injury.

Remove supplied screw with a phillips screwdriver from the trimmer head.

Fit the grass deflector into the slots on trimmer head.

Turn counterclockwise to lock grass deflector into place.

Line up the screw hole in the grass deflector with the center hole in the trimmer head.

Install supplied screw and tighten by turning clockwise with a phillips screwdriver.

OPERATION

WARNING:

Do not allow familiarity with products to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

Starting/stopping the string trimmer

See Figure 4.

To start the string trimmer, push the lock-out button to either the right or left side and pull the switch trigger.

To stop the string trimmer, release the switch trigger.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating products. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

tO INSTALL BATTERY PACK

See Figure 5.

Insert the battery pack into the product as shown.

Make sure the latches on each side of the battery pack snap into place and the battery pack is secured before beginning operation.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs.

For complete charging instructions, refer to the Operator’s Manuals for your Ryobi One+ battery pack and charger models.

WARNING:

Battery products are always in operating condition. Therefore, the ON/OFF switch should always be turned OFF when not in use.

NOTE: To avoid serious personal injury, always remove the battery pack and keep hands clear of the look-out button when carrying or transporting the tool.

TO REMOVE BATTERY PACK

See Figure 5.

Depress the latches on each side of the battery pack.

Remove the battery pack.

TELESCOPING BOOM

See Figure 6.

The boom can be extended or shortened for ease of use.

Remove the battery pack.

Loosen the telescoping boom coupler by turning it coun- terclockwise. Slide the boom to the desired position.

Tighten the coupler by turning clockwise. Make sure the boom is securely tightened before reinstalling the battery pack.

ADJUSTABLE FRONT HANDLE

See Figure 7.

The angle of the front handle can be adjusted 180°.

Remove the battery pack.

Set the trimmer on a flat surface and turn the knob counterclockwise to loosen the handle.

8 — English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Save this Manual for Future ReferenceSwitch trigger gâchette, gatillo del interruptor Position D’UTILISATION Correcte Enrouler Dans LE Sens Horaire Enrolle Hacia LA DerechaTable of Contents Important Safety Instructions Read all instructionsImportant Safety Instructions Symbols Service Symbol Signal MeaningFeatures AssemblyOperation To Remove Battery PackAdjustable Front Handle Attaching Grass DeflectorAdvancing String Operating the TrimmerCutting Tips Advancing the String ManuallyGeneral Maintenance MaintenanceSpool Replacement Battery Pack Removal and Preparation for RecyclingTroubleshooting Problem Possible Cause SolutionWarranty Limited Warranty StatementAVERTISSEMENT  Instructions Importantes Concernant LA SécuritéLire Toutes LES Instructions Instructions Importantes Concernant LA Sécurité NOM Désignation / Explication Dépannage AvertissementCaractéristiques AssemblageMise EN Marche ET Arrêt DE LA Tondeuse À Fouet UtilisationFixation DU Déflecteur D’HERBE Instalación DEL PileConseils Avance DU FIL DE CoupeUtilisation DE LA Tondeuse À Fouet Avance Manuelle DU FILEntretien Remplacement DE LA BobineRemplacement DU FIL Entretien GénéralDépannage Problème Possible Cause Solution’AIDE Garantie Énoncé DE LA Garantie LimitéeAdvertencia Instrucciones DE Seguridad ImportantesLea todas las instrucciones Instrucciones DE Seguridad Importantes Símbolos Símbolo Nombre DENOMINACIÓN/EXPLICACIÓNPrecaución PeligroServicio Características ArmadoEncendido Y Apagado DE LA Recortadora FuncionamientoAcoplamiento DEL Deflector DE Hierba Instalación DEL Paquete DE BateríasAvance DEL Hilo Manejo DE LA RecortadoraRecomendaciones DE Corte Avance Manual DEL HiloMantenimiento General MantenimientoAdvertencia Reemplazo DEL Carrete Reemplazo DEL HiloCorrección DE Problemas Llámenos PrimeroGarantía Declaración DE LA Garantía LimitadaEspañol Español Español Tondeuse À Fouet Manuel D’UTILISATION / Manual DEL OperadorRecortadora de hilo

P2001 specifications

The Ryobi P2001 is a powerful and versatile cordless drill that meets the needs of both DIY enthusiasts and professionals alike. This compact and lightweight tool is designed to provide exceptional performance in a variety of drilling and fastening applications, making it an indispensable addition to any toolbox.

One of the standout features of the Ryobi P2001 is its impressive 18-volt battery system. This lithium-ion battery technology offers extended run time and durability, ensuring that users can complete their projects without the hassle of frequent recharges. The included battery can deliver consistent power throughout its discharge cycle, providing optimal performance in both low and high torque scenarios.

The P2001 is equipped with a variable speed trigger, allowing users to easily control the drilling speed based on the specific task at hand. With a maximum speed of up to 1,600 RPM, this drill is perfect for a broad range of applications, from drilling into wood and metal to driving screws with precision. The tool also features a two-speed gearbox, providing users with greater control when handling lightweight and heavy-duty tasks.

Another key characteristic of the Ryobi P2001 is its high torque capabilities. With a maximum torque of 450 inch-pounds, users can confidently tackle tough materials without fear of underperformance. This makes the drill suitable for heavier workloads, further increasing its versatility in both home renovations and professional settings.

The design of the P2001 embraces user comfort and convenience. Its ergonomic handle ensures a secure and comfortable grip, reducing fatigue during prolonged use. Additionally, the integrated LED work light illuminates dark workspaces, allowing users to drill and fasten with precision, regardless of lighting conditions.

The Ryobi P2001 is compatible with the extensive ONE+ system, allowing users to share batteries across a wide range of Ryobi's 18-volt cordless tools. This means users can save money and reduce clutter by minimizing the number of batteries and chargers needed for various tools.

Overall, the Ryobi P2001 combines advanced technologies, robust performance, and user-friendly design to deliver a dependable cordless drill that excels in versatility and efficiency. Whether for everyday household tasks or professional jobs, this drill is an excellent choice that stands out in the crowded market of power tools.
Top Page Image Contents