Ryobi CS26 RY28020 Operation, To Attach the Straight Shaft Grass Deflector SS26, Oxygenated Fuels

Page 12

ASSEMBLY

TO ATTACH THE STRAIGHT SHAFT GRASS DEFLECTOR - SS26

See Figure 7.

Remove the wing screw from the grass deflector.

Insert the tab on the mounting bracket in the slot on the grass deflector.

Align the screw hole in the mounting bracket with the screw hole in the grass deflector.

Insert the wing screw through the mounting bracket and into the grass deflector.

Tighten the screw securely.

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

FILLING TANK

Clean surface around fuel cap to prevent contamination.

Loosen fuel cap slowly. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Prior to replacing the fuel cap, clean and inspect the gasket.

Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

WARNING:

Never use blades, flailing devices, wire, or rope on this product. Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke! Failure to heed this warning could result in seri- ous personal injury.

FUELING AND REFUELING THE TRIMMER

FUEL MIXTURE

This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline.

Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use.

Mix a high quality 2-cycle engine lubricant at 2.6 oz. per gallon (US).

Do not use automotive lubricant or 2-cycle outboard ­lubricant. DO NOT mix quantities larger than usable in a 30 day period.

OXYGENATED FUELS

DO NOT USE E85 FUEL. IT WILL VOID YOUR WARRANTY.

NOTE:  Fuel system damage or performance problems re- sulting from the use of an oxygenated fuel containing more than the percentages of oxygenates stated below are not covered under warranty.

Ethanol. Gasoline containing up to 10% ethanol by volume (commonly referred to as E10) or 15% ethanol by volume (commonly referred to as E15) are acceptable. E85 is not.

STARTING AND STOPPING

See Figures 8 - 10.

Trimmer should be on a flat, bare surface for starting.

HIGH QUALITY 2-CYCLE ENGINE LUBRICANT

GASOLINE

LUBRICANT

 

 

1 gallon (US)

2.6 oz.

1 liter

20 cc (20 ml)

To start a cold engine:

Slowly press the primer bulb 10 times.

NOTE: After the 7th press, fuel should be visible in the primer bulb. If it is not, continue to press the primer until you see fuel in the bulb.

Set the choke lever to the FULL CHOKE position.

8 — English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Save this Manual for Future Reference Toutes LES Versions Todas LAS VersionesCS26 Iii DE LA Herramienta Latch loquet, pestillo Table of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules for Trimmer USESymbols Symbol Signal MeaningSymbol Name Explanation Features AssemblyInstalling the Power Head to the Attachment Removing the Attachment from the Power HeadAttaching the Storage Hanger Attaching the Front HandleOperation To Attach the Straight Shaft Grass Deflector SS26Fueling and Refueling the Trimmer Oxygenated FuelsAdvancing String Using the REEL-EASYTAP Advance System Operating the TrimmerCutting Tips Advancing the String ManuallyMaintenance General MaintenanceSpool Replacement REEL-EASYTAP ­ADVANCE System Line ReplacementInstalling Line in Dual Spool Fixed Line String Head Insert Cleaning the Exhaust Port and Muffler Spark ArrestorIdle Speed Adjustment Cleaning AIR Filter ScreenTroubleshooting Gap. Refer to Spark Plug Replacement earlierSpeed. See Figure Warranty This Product WAS Manufactured with a Catalyst MufflerLimited Warranty Statement MANUFACTURER’S Warranty Coverage Page Page Règles DE Sécurité Générales AvertissementLire Toutes LES Instructions Règles DE Sécurité Particulières Symboles Symbole NOM ExplicationCaractéristiques AssemblageInstallation DU BLOC-MOTEUR SUR L’ACCESSOIRE Retrait DE L’ACCESSOIRE DU Bloc MoteurInstallation DE LA Poignée Avant Installation DU Déflecteur D’HERBE AvertissementInstallation DU Déflecteur D’HERBE D’ARBRE Droit SS26 UtilisationApprovisionnement EN Carburant Carburants OxygénésUtilisation DU TAILLE-BORDURES Conseils DE CoupeAvance Manuelle DE LA Ligne DE Coupe Pour toute assistance, appeler le Remplacement DE Ligne Installation DE LA Bobine À FIL Fixe Dual SpoolEntretien Entretien GénéralRemplacement DE LA Bougie Réglage DU RalentiNettoyage DU Filtre À AIR Écran Bouchon DU Réservoir AvertissementDépannage Garantie ’AIDEFonctionnement Chaque année Énoncé DE LA Garantie Limitée Responsabilités DU Propriétaire Dans LE Cadre DE LA Garantie Reglas DE Seguridad Generales AdvertenciaLEA Todas LAS Instrucciones Reglas DE Seguridad Específicas Symbolo Nombre Explicatión SímbolosPeligro PrecauciónCaracterísticas ArmadoInstalación DEL Cabezal Motor EN EL Aditamento Desmontaje DEL Aditamento DEL Cabezal MotorMontaje DE LA ASA DE ALMACENAMIENTO Montaje DEL Mango DelanteroFuncionamiento Para Montar EL Deflector DE Pasto Para EJE Recto SS26Combustibles Oxigenados Arranque Y ApagadoManejo DE LA Recortadora Sugerencias Para CortarAvance Manualmente EL Hilo Cuchilla DE Corte DEL Hilo EN EL Deflector DE HierbaMantenimiento Mantenimiento GeneralReabastecimiento DEL Hilo Limpieza DEL Orificio DE Escape Y DEL Silenciador ParachispasAjuste DE LA Marcha Lenta Limpieza DEL Filtro DE Aire PantallaSolución DE Problemas El motor no arranca No hay chispaGarantía Conjunto DE Silenciador Catalítico4050 Declaración DE LA Garantía Limitada Cobertura DE LA Garantía DEL Fabricante Manuel D’UTILISATION / Manual DEL Operador California PropositionProposition 65 DE L’ÉTAT DE Californie California Propuesta DE LEY NÚM

SS26 RY28040, CS26 RY28020 specifications

The Ryobi CS26 RY28020 and SS26 RY28040 are two powerful and efficient gas-powered string trimmers, tailored for both residential and professional landscaping tasks. These models are synonymous with durability, performance, and ease of use, making them staple tools for homeowners and landscape professionals alike.

One of the standout features of the CS26 is its 26cc two-cycle engine, which delivers impressive power while maintaining a lightweight design. This engine provides ample torque, making it effective for tackling thick grass and weeds. The SS26 offers a similar robust performance with its 26cc engine, designed to handle tough outdoor conditions, ensuring precision in trimming and maintenance tasks.

Both models come equipped with Ryobi's innovative Easy Start System. This technology simplifies the starting process, requiring less effort and providing a quick and reliable start every time. This feature is particularly beneficial for users who value convenience and efficiency in their gardening routines.

Ergonomics also play a crucial role in the design of these trimmers. With an adjustable handlebar and a lightweight build, users can easily maneuver the trimmers, reducing fatigue during extended use. The curved shaft design of the CS26 allows for easier access to hard-to-reach areas, while the straight shaft of the SS26 offers greater reach and increased cutting convenience.

Another notable characteristic is the automatic feed spool, which allows the trimmer line to extend automatically as needed. This saves time and effort, eliminating the hassle of manual line adjustments and keeping you focused on your task. The robust cutting width of both trimmers ensures efficient coverage, allowing you to complete your yard work swiftly.

Durability is also a key factor; both models are engineered with high-quality materials that withstand the rigors of outdoor use. The reliable construction paired with easy maintenance features not only enhances longevity but also ensures that both the CS26 and SS26 can handle various landscaping challenges over the years.

In summary, the Ryobi CS26 RY28020 and SS26 RY28040 are excellent choices for anyone looking to invest in a gas-powered string trimmer that balances power, convenience, and durability. With their advanced technologies, ergonomic designs, and user-friendly features, these trimmers are designed to meet diverse trimming needs while ensuring a comfortable user experience. Whether for a small garden or a larger landscaping project, these models provide the tools necessary to achieve a professionally manicured look.
Top Page Image Contents