|
| TROUBLESHOOTING |
| ||
|
|
| |||
| Problem | Possible Cause |
|
| Possible Solution |
• Slow running, noisy or hot blades. | • Dry, corroded blades. |
|
| • Lubricate blades. | |
|
| • Blades or blade support bent. |
| • Straighten blade orblade support. | |
|
| • Bent or damaged teeth. |
|
| • Straighten teeth. |
|
| • Loose blade bolts. |
|
| • Tighten blade bolts. |
• Unit will not start. | • Lock off not fully operated. |
|
| • Check that lock off is fully pulled backprior to | |
|
| • Cord not plugged in. |
|
| moving main trigger. |
|
|
|
| • Plug cord into a working outlet. | |
|
| • Circuit fuse is blown. |
|
| • Replace circuit fuse.(If the product repeatedly |
|
|
|
|
| causes the circuit fuse to blow,discontinue use |
|
|
|
|
| immediately and have it serviced at a Black & |
|
| • Circuit breaker is tripped. |
|
| Decker service center or authorized servicer.) |
|
|
|
| • Reset circuit breaker.(If the product repeatedly | |
|
|
|
|
| causes the circuit breaker to trip,discontinue use |
|
|
|
|
| immediately and have it serviced at a |
|
|
|
|
| Black & Decker service center or authorized |
|
| • Cord or switch is damaged. |
|
| servicer.) |
|
|
|
| • Have cord or switch replaced at Black | |
|
|
|
|
| & Decker Service Center or Authorized Servicer. |
|
|
| |||
For assistance with your product, visit | our website www.blackanddecker.com for the location of the service center nearest you or call the | ||||
BLACK & DECKER help line at |
|
|
|
| |
Imported by | See | ||||
|
| ||||
|
| Black & Decker (U.S.) Inc., |
| – Yellow Pages – | |
|
| 701 E. Joppa Rd. | for Service & Sales | ||
|
| Towson, MD 21286 U.S.A. |
|
|
|
|
| 9 |
|
|
|