Snapper S200KAV2561, S200XK2761 manual Foot Pedal Adjustment, Raise and Lower the Roll Bar

Page 20

Operation

Foot Pedal Adjustment

The deck lift foot pedal can be adjusted to accommodate the operator’s height for optimal comfort.

To adjust pedal position:

1.Remove the foot pedal (A, Figure 6) from the pedal mount tab (B).

2.Remove the pedal mount hardware (C) and rotate the tab 180 degrees.

3.Reinstall the pedal mount hardware and tighten securely.

4.Reinstall the foot pedal on the pedal mount tab in the proper orientation as shown in Figure 6.

B

AC

D

Figure 6. Foot Pedal Adjustment

A.Deck Lift Foot Pedal

B.Pedal Mount Tab

C.Pedal Mount Hardware

D.Optional Position

Operation

Raise and Lower the Roll Bar

WARNING

AVOID SERIOUS INJURY OR DEATH FROM ROLL OVER:

Keep roll bar in the raised position and use the seat belt.

THERE IS NO ROLL OVER PROTECTION WHEN THE ROLL BAR IS DOWN

Lower the roll bar only when necessary and NEVER remove it.

Do NOT use seat belt when the roll bar is down. Raise the roll bar as soon as clearance permits. Do NOT jump off if mower tips.

To Lower the Roll Bar:

1.Pull the hair pin clips (A, Figure 7) out of the retainer pins (B).

2.Push or pull the top of the roll bar (C) forward against the rubber stops (D) and remove the retainer pins (B).

3.Lower the roll bar into the down position (see insert, Figure 7).

To Raise the Roll Bar:

1.Pull the hair pin clips (A) out of the retainer pins (B) and remove the retainer pins.

2.Raise the roll bar (C) until the rubber stops (D) contact the upright tubes.

3.Push or pull the top of the roll bar forward against the rubber stops and reinstall the retainer pins and hair pin clips to secure the roll bar in the raised position.

C

D

 

 

A

B

D

Figure 7. Raise & Lower the Roll Bar

A.Hair Pin Clip

B.Retainer Pin

C.Roll Bar

D.Rubber Stop

18

www.SnapperPro.com

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Briggs & Stratton Yard Power Products Group Model Number DescriptionNorth Main Street Munnsville, NYDate Purchased Table of Contents Operator Safety Operator SafetyOperating Safety Read the ManualMoving Parts Slope OperationThrown Objects Overhead Obstacles Roll BAR USERetaining WALLS, DROP-OFFS, and Water Fuel and Maintenance Enclosed AreasTraining PreparationOperation Or warnings which must be followedTowed Equipment RIDE-ON Units EmissionsPeriods of exposure Do NotSafe Handling of Gasoline Service and MaintenanceMaintenance and Storage Roll BAR Instructions Operational WarningsInspection and Maintenance of the Roll BAR Seat Belt Safety Decals Safety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsFeatures and Controls Identification NumbersFeatures and Controls Seat Adjustment LeverIgnition Switch Control FunctionsFeatures & Controls General Operating Safety OperationOperation Checks Before StartingSeat Adjustment Mowing Height AdjustmentCheck Tire Pressures Tire PressureFoot Pedal Adjustment Raise and Lower the Roll BarInsert the key into the ignition switch and turn it to Starting the EngineStopping the Rider Pushing the Rider By HandZero Turn Driving Practice Smooth TravelForward Travel Practice Forward Reverse TravelPractice Turning Around a Corner Executing an End-Of-Row Zero TurnPractice Turning In Place Executing TurnsMowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Attaching a Trailer Proper MulchingMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for MulchingRegular Maintenance Maintenance ScheduleSafety Items Before Every Spring Hours Fall Check Rider / Mower for loose hardwareRegular Maintenance Engine MaintenanceChecking / Adding Fuel Fuel FilterLubrication GreaseOil Lubricating the Front CastersChange Interval Every 250 Hours Filter Part Number Check Hydraulic Oil LevelChange Hydraulic Oil Filter Never weld or straighten bent mower blades Servicing The Mower BladesInspecting the Mower Blades Reinstalling the Mower Blades Balancing the Mower Blade NailGround Speed Control Lever Adjustment Speed Balancing AdjustmentNeutral Adjustment Parking Brake AdjustmentReturn-To-Neutral Adjustment Remove blocks from under the mower deck Deck Rod Timing AdjustmentDeck Leveling Adjustment Mower Belt Replacement To avoid damaging belts, do not PRY Belts Over PulleysHydraulic Pump Drive Belt Replacement Use extreme caution when removing this springBattery Maintenance Battery Service Checking Battery VoltageCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryRegular Maintenance Storage Starting After Long Term StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysTroubleshooting TroubleshootingTroubleshooting Chart Troubleshooting the RiderTroubleshooting the Mower Not driveTroubleshooting Troubleshooting Common Cutting ProblemsSpecifications DimensionsEngine ChassisFerris Limited Warranty Mower Deck Product Specifications Common Service PartsTractor

S200KAV2561, S200XK2761 specifications

The Snapper S200KAV2561 and S200XK2761 are two standout models in the Snapper range of lawn care equipment, designed for homeowners seeking efficiency, durability, and user-friendly features. Both models embody the core values of the Snapper brand, which include innovative technology, superior performance, and ergonomic design.

The Snapper S200KAV2561 is equipped with a robust 25-horsepower engine, making it an ideal choice for tackling large lawns and challenging terrains. Its powerful engine is paired with a reliable automatic transmission, ensuring smooth operation while allowing the user to focus on the task at hand. This model features a wide 48-inch cutting deck, which enhances productivity and reduces mowing time by covering more ground in each pass. Additionally, the S200KAV2561 has a versatile height adjustment lever, enabling users to select from various cutting heights for a customized finish.

On the other hand, the Snapper S200XK2761 brings a new level of sophistication and efficiency with its 26-horsepower engine. This model also offers a robust hydrostatic transmission, providing effortless control and smooth acceleration without the need for manual gear shifting. The S200XK2761 features a 54-inch cutting deck, ensuring an impressive cutting width to tackle larger properties with ease. One of its standout technologies is the unique 2-in-1 mowing system that allows for both side discharge and mulch options, promoting efficient grass management and healthy lawn growth.

Both models demonstrate Snapper's commitment to user comfort and convenience. They come with an ergonomic seat design that offers cushioning and support for prolonged use, as well as easy-access controls that simplify operation. The durable construction of both models ensures longevity, with high-quality materials used throughout to withstand the rigors of regular lawn maintenance.

In terms of technology, both the S200KAV2561 and S200XK2761 boast fuel-efficient engines designed to minimize emissions while maximizing performance. Additionally, they incorporate Snapper's easy-start system, allowing users to begin their mowing tasks with minimal effort.

Overall, the Snapper S200KAV2561 and S200XK2761 offer a blend of power, precision, and ease of use that appeals to both novice and experienced homeowners. Whether you need professional-grade performance for a large property or a reliable mower for regular maintenance, either of these models will meet and exceed your expectations. With their excellent features and customer-centric designs, the Snapper S200 series is poised to enhance your lawn care experience.
Top Page Image Contents