Snapper S200KAV2561, S200XK2761 manual Return-To-Neutral Adjustment

Page 35

Return-To-Neutral Adjustment

To determine if it is necessary to adjust the neutral return, perform the following steps.

1.Disengage the PTO, engage the parking brake and turn off the engine.

2.Move the ground speed control levers into the operating position, pull levers rearward and release.

3.Move the ground speed control levers out towards the neutral position. If the levers do not align with the notches in the neutral lock plate, it is necessary to adjust the adjustment linkage rod (B, Figure 36).

WARNING

To avoid serious injury, perform adjustments only with engine stopped, key removed and tractor on level ground.

Adjustment

1.Pull the ground speed control lever rearward and release to check position. If the ground speed control lever does not align itself with the notch in the neutral plate, then move the set collar (A) forward or back on the adjustment linkage rod (B) until the speed control lever aligns with the notch. Retighten the set collar.

2.Make sure that the neutral return bushing (D) is seated correctly in the spring stop plate (E).

3.Pull the ground speed control lever rearward and release to check position again. Adjust as necessary to align the ground speed control levers with the notches in the neutral lock plate.

It is important to note that after every adjustment of the neutral return rod, the lever must be pulled rearward and released to properly check the neutral position.

Regular Maintenance

B

C

 

 

 

 

A

 

 

D

E

Figure 36. Neutral Return Spring Adjustment

A.Set Collar

B.Adjustment Linkage Rod

C.Neutral Return Spring

D.Neutral Return Bushing

E.Spring Stop Plate

Maintenance

33

Image 35
Contents Munnsville, NY Briggs & Stratton Yard Power Products GroupModel Number Description North Main StreetDate Purchased Table of Contents Read the Manual Operator SafetyOperator Safety Operating SafetyMoving Parts Slope OperationThrown Objects Overhead Obstacles Roll BAR USERetaining WALLS, DROP-OFFS, and Water Enclosed Areas Fuel and MaintenanceOr warnings which must be followed TrainingPreparation OperationDo Not Towed Equipment RIDE-ON UnitsEmissions Periods of exposureSafe Handling of Gasoline Service and MaintenanceMaintenance and Storage Operational Warnings Roll BAR InstructionsInspection and Maintenance of the Roll BAR Seat Belt Safety Decals North American Safety Icons Safety Interlock SystemOperational Safety Checks Safety IconsIdentification Numbers Features and ControlsControl Functions Features and ControlsSeat Adjustment Lever Ignition SwitchFeatures & Controls Checks Before Starting General Operating SafetyOperation OperationTire Pressure Seat AdjustmentMowing Height Adjustment Check Tire PressuresRaise and Lower the Roll Bar Foot Pedal AdjustmentPushing the Rider By Hand Insert the key into the ignition switch and turn it toStarting the Engine Stopping the RiderForward Reverse Travel Zero Turn Driving PracticeSmooth Travel Forward Travel PracticeExecuting Turns Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn Practice Turning In PlaceTall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassMowing Methods Engine Speed & Ground Speed for Mulching Attaching a TrailerProper Mulching Mulching Requires Excellent Mowing ConditionsHours Fall Check Rider / Mower for loose hardware Regular MaintenanceMaintenance Schedule Safety Items Before Every SpringFuel Filter Regular MaintenanceEngine Maintenance Checking / Adding FuelLubricating the Front Casters LubricationGrease OilChange Interval Every 250 Hours Filter Part Number Check Hydraulic Oil LevelChange Hydraulic Oil Filter Never weld or straighten bent mower blades Servicing The Mower BladesInspecting the Mower Blades Balancing the Mower Blade Nail Reinstalling the Mower BladesSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentParking Brake Adjustment Neutral AdjustmentReturn-To-Neutral Adjustment Remove blocks from under the mower deck Deck Rod Timing AdjustmentDeck Leveling Adjustment To avoid damaging belts, do not PRY Belts Over Pulleys Mower Belt ReplacementUse extreme caution when removing this spring Hydraulic Pump Drive Belt ReplacementBattery Maintenance Jump Starting With Auxiliary Booster Battery Battery ServiceChecking Battery Voltage Charging a Completely Discharged BatteryRegular Maintenance Long Term Storage Longer Than 30 Days StorageStarting After Long Term Storage Temporary Storage 30 Days Or LessTroubleshooting the Rider TroubleshootingTroubleshooting Troubleshooting ChartNot drive Troubleshooting the MowerTroubleshooting Common Cutting Problems TroubleshootingChassis SpecificationsDimensions EngineFerris Limited Warranty Mower Deck Product Specifications Common Service PartsTractor

S200KAV2561, S200XK2761 specifications

The Snapper S200KAV2561 and S200XK2761 are two standout models in the Snapper range of lawn care equipment, designed for homeowners seeking efficiency, durability, and user-friendly features. Both models embody the core values of the Snapper brand, which include innovative technology, superior performance, and ergonomic design.

The Snapper S200KAV2561 is equipped with a robust 25-horsepower engine, making it an ideal choice for tackling large lawns and challenging terrains. Its powerful engine is paired with a reliable automatic transmission, ensuring smooth operation while allowing the user to focus on the task at hand. This model features a wide 48-inch cutting deck, which enhances productivity and reduces mowing time by covering more ground in each pass. Additionally, the S200KAV2561 has a versatile height adjustment lever, enabling users to select from various cutting heights for a customized finish.

On the other hand, the Snapper S200XK2761 brings a new level of sophistication and efficiency with its 26-horsepower engine. This model also offers a robust hydrostatic transmission, providing effortless control and smooth acceleration without the need for manual gear shifting. The S200XK2761 features a 54-inch cutting deck, ensuring an impressive cutting width to tackle larger properties with ease. One of its standout technologies is the unique 2-in-1 mowing system that allows for both side discharge and mulch options, promoting efficient grass management and healthy lawn growth.

Both models demonstrate Snapper's commitment to user comfort and convenience. They come with an ergonomic seat design that offers cushioning and support for prolonged use, as well as easy-access controls that simplify operation. The durable construction of both models ensures longevity, with high-quality materials used throughout to withstand the rigors of regular lawn maintenance.

In terms of technology, both the S200KAV2561 and S200XK2761 boast fuel-efficient engines designed to minimize emissions while maximizing performance. Additionally, they incorporate Snapper's easy-start system, allowing users to begin their mowing tasks with minimal effort.

Overall, the Snapper S200KAV2561 and S200XK2761 offer a blend of power, precision, and ease of use that appeals to both novice and experienced homeowners. Whether you need professional-grade performance for a large property or a reliable mower for regular maintenance, either of these models will meet and exceed your expectations. With their excellent features and customer-centric designs, the Snapper S200 series is poised to enhance your lawn care experience.