Snapper S200KAV2561, S200XK2761 manual Mower Belt Replacement

Page 37

Mower Belt Replacement

NOTICE

To avoid damaging belts, DO NOT PRY BELTS OVER PULLEYS.

1.Park the tractor on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the parking brake, turn off the engine, and remove the ignition key.

2.Lower the mower deck to its lowest cutting position and remove the mower deck guards.

3.Using a 1/2” breaker bar, place the square end in the square hole located in the end of the idler arm (A, Figures 41). Carefully rotate the breaker bar counter- clockwise, which will relieve the tension on the belt exerted from the idler arm.

WARNING

Use extreme caution when rotating the idler arm with the breaker bar, due to the increased tension in the spring as the idler arm is being rotated. Injury may result if the breaker bar is prematurely released while the spring is under tension.

4.Slide the drive belt over the edge of the stationary idler pulley (B). Carefully release the tension on the breaker bar.

5.Remove the old belt and replace with a new one. Make sure the V-side of the belt runs in the pulley grooves (Figure 42).

6.Install the drive belt on the PTO pulley, the spindle pulleys and all idler pulleys except the stationary pulley (B, Figure 41). Carefully rotate the breaker bar counter- clockwise and install the belt on the stationary idler pulley (B). Carefully release the tension on the breaker bar.

7.Reinstall the mower deck guards.

8.Run the mower under no-load condition for about 5 minutes to break-in the new belt.

Regular Maintenance

B A

B

Figure 41. Mower PTO Belt

A.Idler Arm

B.Stationary Idler Pulley

D

 

B

C

A

 

 

A

 

 

 

 

D

A

 

 

 

 

Figure 42. Mower PTO Belt Routing

A.Spindle Pulley

B.PTO Drive Belt

C.Spring-loaded Idler Pulley

D.Stationary Idler Pulley

Maintenance

35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Model Number Description Briggs & Stratton Yard Power Products GroupNorth Main Street Munnsville, NYDate Purchased Table of Contents Operator Safety Operator SafetyOperating Safety Read the ManualThrown Objects Slope OperationMoving Parts Retaining WALLS, DROP-OFFS, and Water Roll BAR USEOverhead Obstacles Enclosed Areas Fuel and MaintenancePreparation TrainingOperation Or warnings which must be followedEmissions Towed Equipment RIDE-ON UnitsPeriods of exposure Do NotMaintenance and Storage Service and MaintenanceSafe Handling of Gasoline Operational Warnings Roll BAR InstructionsInspection and Maintenance of the Roll BAR Seat Belt Safety Decals Operational Safety Checks Safety Interlock SystemSafety Icons North American Safety IconsIdentification Numbers Features and ControlsSeat Adjustment Lever Features and ControlsIgnition Switch Control FunctionsFeatures & Controls Operation General Operating SafetyOperation Checks Before StartingMowing Height Adjustment Seat AdjustmentCheck Tire Pressures Tire PressureRaise and Lower the Roll Bar Foot Pedal AdjustmentStarting the Engine Insert the key into the ignition switch and turn it toStopping the Rider Pushing the Rider By HandSmooth Travel Zero Turn Driving PracticeForward Travel Practice Forward Reverse TravelExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place Executing TurnsMowing Recommendations MowingHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods Proper Mulching Attaching a TrailerMulching Requires Excellent Mowing Conditions Engine Speed & Ground Speed for MulchingMaintenance Schedule Regular MaintenanceSafety Items Before Every Spring Hours Fall Check Rider / Mower for loose hardwareEngine Maintenance Regular MaintenanceChecking / Adding Fuel Fuel FilterGrease LubricationOil Lubricating the Front CastersChange Hydraulic Oil Filter Check Hydraulic Oil LevelChange Interval Every 250 Hours Filter Part Number Inspecting the Mower Blades Servicing The Mower BladesNever weld or straighten bent mower blades Balancing the Mower Blade Nail Reinstalling the Mower BladesSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentParking Brake Adjustment Neutral AdjustmentReturn-To-Neutral Adjustment Deck Leveling Adjustment Deck Rod Timing AdjustmentRemove blocks from under the mower deck To avoid damaging belts, do not PRY Belts Over Pulleys Mower Belt ReplacementUse extreme caution when removing this spring Hydraulic Pump Drive Belt ReplacementBattery Maintenance Checking Battery Voltage Battery ServiceCharging a Completely Discharged Battery Jump Starting With Auxiliary Booster BatteryRegular Maintenance Starting After Long Term Storage StorageTemporary Storage 30 Days Or Less Long Term Storage Longer Than 30 DaysTroubleshooting TroubleshootingTroubleshooting Chart Troubleshooting the RiderNot drive Troubleshooting the MowerTroubleshooting Common Cutting Problems TroubleshootingDimensions SpecificationsEngine ChassisFerris Limited Warranty Tractor Product Specifications Common Service PartsMower Deck

S200KAV2561, S200XK2761 specifications

The Snapper S200KAV2561 and S200XK2761 are two standout models in the Snapper range of lawn care equipment, designed for homeowners seeking efficiency, durability, and user-friendly features. Both models embody the core values of the Snapper brand, which include innovative technology, superior performance, and ergonomic design.

The Snapper S200KAV2561 is equipped with a robust 25-horsepower engine, making it an ideal choice for tackling large lawns and challenging terrains. Its powerful engine is paired with a reliable automatic transmission, ensuring smooth operation while allowing the user to focus on the task at hand. This model features a wide 48-inch cutting deck, which enhances productivity and reduces mowing time by covering more ground in each pass. Additionally, the S200KAV2561 has a versatile height adjustment lever, enabling users to select from various cutting heights for a customized finish.

On the other hand, the Snapper S200XK2761 brings a new level of sophistication and efficiency with its 26-horsepower engine. This model also offers a robust hydrostatic transmission, providing effortless control and smooth acceleration without the need for manual gear shifting. The S200XK2761 features a 54-inch cutting deck, ensuring an impressive cutting width to tackle larger properties with ease. One of its standout technologies is the unique 2-in-1 mowing system that allows for both side discharge and mulch options, promoting efficient grass management and healthy lawn growth.

Both models demonstrate Snapper's commitment to user comfort and convenience. They come with an ergonomic seat design that offers cushioning and support for prolonged use, as well as easy-access controls that simplify operation. The durable construction of both models ensures longevity, with high-quality materials used throughout to withstand the rigors of regular lawn maintenance.

In terms of technology, both the S200KAV2561 and S200XK2761 boast fuel-efficient engines designed to minimize emissions while maximizing performance. Additionally, they incorporate Snapper's easy-start system, allowing users to begin their mowing tasks with minimal effort.

Overall, the Snapper S200KAV2561 and S200XK2761 offer a blend of power, precision, and ease of use that appeals to both novice and experienced homeowners. Whether you need professional-grade performance for a large property or a reliable mower for regular maintenance, either of these models will meet and exceed your expectations. With their excellent features and customer-centric designs, the Snapper S200 series is poised to enhance your lawn care experience.
Top Page Image Contents