OPERATING INSTRUCTIONS
STEP 1:
Connect the high pressure hose to the unit’s high pressure outlet.
STEP 2: |
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
STEP 3: |
Install the supplied connector to the unit’s water inlet.
STEP 4:
Screw the supplied garden hose connector on to the end of your gar- den hose.
STEP 5:
Push the garden hose connector on to the water inlet connector and make sure you hear it click into place before proceeding.
STEP 6: |
Connect garden hose to the cold water source and turn water on completely.
8English