HAZARD
RISK OF HOT SURFACES
WHAT CAN HAPPEN | HOW TO PREVENT IT |
|
|
• Contact with hot surfaces, such as | • During operation, touch only the control |
engines exhaust components, could | surfaces of the pressure washer. Keep |
result in serious burn. | children away from the pressure washer |
| at all times. They may not be able to |
| recognize the hazards of this product. |
|
|
HAZARD
RISK OF INJURY AND PROPERTY
DAMAGE WHEN TRANSPORTING
OR STORING
WHAT CAN HAPPEN | HOW TO PREVENT IT |
|
|
• Fuel or oil can leak or spill and could | • If pressure washer is equipped with a |
result in fire or breathing hazard, serious | fuel |
injury or death can result. Fuel or oil | off position before transporting to avoid |
leaks will damage carpet, paint or other | fuel leaks. If pressure washer is not |
surfaces in vehicles or trailers. | equipped with a fuel |
| the fuel from tank before transporting. |
| Only transport fuel in an OSHA approved |
| container. Always place pressure washer |
| on a protective mat when transporting to |
| protect against damage to vehicle from |
| leaks. Remove pressure washer from |
| vehicle immediately upon arrival at your |
| destination. |
|
|
The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint,
auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel.
Operating without flow of water will result in equipment damage. Operating the pressure washer with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2 minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.
7- ENG | D25852 |