Craftsman D25852, 919.769060 owner manual Risk to Fluid Injection, Risk of Chemical Burn

HAZARD

RISK TO FLUID INJECTION

	WHAT CAN HAPPEN		HOW TO PREVENT IT
•	Your washer operates at fluid pressures	•	Never place hands in front of nozzle.
	and velocities high enough to penetrate	•	Direct spray away from self and others.
	human and animal flesh, which could	•	Make sure hose and fittings are tight-
	result in amputation or other serious		ened and in good condition. Never
	injury. Leaks caused by loose fittings or		hold onto the hose or fittings during op-
	worn or damaged hoses can result in		eration.
	injection injuries. DO NOT TREAT FLUID	•	Do not allow hose to contact muffler.
	INJECTION AS A SIMPLE CUT! See a	•	Never attach or remove wand or hose
	physician immediately!		fittings while system is pressurized.
		•	Use only hose and high pressure
			accessories rated for pressure higher
			than your pressure washer's p.s.i.
•	Relieve system pressure before at-	•	To relieve system pressure, shut off
	tempting maintenance or disassembly		engine, turn off water supply, and pull
	of equipment.		gun trigger until water stops flowing.

HAZARD

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN HOW TO PREVENT IT

•Use of acids, toxic or corrosive chemi- cals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

•Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household deter- gents, cleaners and degreasers recommended for use in pressure washers.

•Wear protective clothing to protect eyes and skin from contact with sprayed materials.

•Do not use chlorine bleach or any other corrosive compound.

D25852 6- ENG