Briggs & Stratton 020274-0 manual Maintenance Schedule, Pressure Washer Maintenance

Page 18

Maintenance

Maintenance Schedule

Follow the hourly or calendar intervals, whichever occurs first. More frequent service is required when operating in adverse conditions noted below.

First 5 Hours

• Change engine oil

Every 8 Hours or Daily

•Check/clean water inlet screen1

•Check high pressure hose

•Check detergent siphoning hose/filter

•Check spray gun and assembly for leaks

•Clean debris

•Check engine oil level

Every 25 Hours or Yearly

• Service engine air cleaner2

Every 50 Hours or Yearly

•Change engine oil2

•Service spark arrester

Every 100 Hours or Yearly

•Service spark plug

•Clean cooling system2

1Clean if clogged. Replace if perforated or torn.

2Service more often under dirty or dusty conditions.

General Recommendations

Regular maintenance will improve the performance and extend the life of the pressure washer. See any qualified dealer for service.

The pressure washer’s warranty does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain the pressure washer as instructed in this manual, including proper storage as detailed in Winter Storage and Long Term Storage.

NOTE: Should you have questions about replacing components on your pressure washer, please call

(800)743-4115for assistance.

Some adjustments will need to be made periodically to properly maintain your pressure washer.

All service and adjustments should be made at least once each season. Follow the requirements in the Maintenance Schedule chart above.

NOTE: Once a year you should clean or replace the spark plug, clean or replace the air filter, and check the spray gun and nozzle extension assembly for wear. A new spark plug and clean air filter assure proper fuel-air mixture and help your engine run better and last longer.

Pump Oil

DO NOT attempt any oil maintenance on this pump. The pump is pre-lubricated and sealed from the factory, requiring no additional maintenance for the life of the pump.

Emissions Control

Maintenance, replacement, or repair of the emissions control devices and systems may be performed by any non-road engine repair establishment or individual.

However, to obtain ”no charge” emissions control service, the work must be performed by a factory authorized dealer. See the Emissions Warranty.

Before Each Use

1.Check engine oil level.

2.Clean debris.

3.Check water inlet screen for damage.

4.Check high pressure hose for leaks.

5.Check detergent siphoning tube and filter for damage.

6.Check spray gun and nozzle extension assembly for leaks.

7.Rinse out garden hose to flush out debris.

Pressure Washer Maintenance

Clean Debris

Daily or before use, clean accumulated debris from cleaning system. Keep linkage, spring and controls clean. Keep area around and behind muffler free from any combustible debris. Inspect cooling air slots and openings on the pressure washer. These openings must be kept clean and unobstructed.

Pressure washer parts should be kept clean to reduce the risk of overheating and ignition of accumulated debris.

• Use a damp cloth to wipe exterior surfaces clean.

NOTICE

Improper treatment of pressure washer can damage it and shorten its life.

•DO NOT insert any objects through cooling slots.

•Use a soft bristle brush to loosen caked on dirt, oil, etc.

•Use a vacuum cleaner to pick up loose dirt and debris.

Check and Clean Inlet Screen

Examine the screen on the pump’s water inlet. Clean it if the screen is clogged or replace it if screen is damaged.

18

BRIGGSandSTRATTON.COM

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s Manual Engine Where to Find UsPressure Washer Date PurchasedTable of Contents Hazard Symbols and Meanings Operator SafetySafety Rules Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsBroken bones, fractures, bruises, or sprains could result Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassUnpack Pressure Washer AssemblyAttach Handle and Accessory Tray Items in the carton includeFuel must meet these requirements Add Engine OilAdd Fuel High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls Oil Drain Drain engine oil hereOperation Pressure Washer LocationClearances and Air Movement How to Start Your Pressure Washer How to Stop Your Pressure Washer Lever to Choke position, then to Run positionHow to Use Accessory Tray How to Use ProjectPro NozzlesFollow these instructions to change ProjectPro nozzles Cleaning and Applying Detergent Usage TipsTo apply detergent, follow these steps Automatic Cool Down System Thermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing For RinsingMaintenance Maintenance SchedulePressure Washer Maintenance Check High Pressure Hose Nozzle MaintenanceRing Maintenance Check Detergent Siphoning TubeChecking Oil Level Engine MaintenanceOil Oil Recommendations Adding Engine OilService Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Install spark plug and tighten firmlyAfter Each Use Air Cooling SystemKeep areas within heavy line clear of debris Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionEmissions Control System Warranty Owner’s Warranty ResponsibilitiesWarranties Maintenance Emission InformationClaims and Coverage Exclusions Limited Warranty Product Specifications Common Service Parts800 Manual del Operario Motor Dónde encontrarnosLimpiadora a Presión Fecha de compraMontaje Resolución de problemas GarantíasSeguridad de Operario Características y mandos OperandoReglas de seguridad Seguridad de OperarioDerscripción del equipo Símbolos de Peligro y SignificadosAdvertencia Riesgo de electrocuciónCuando Pruebe LA Bujía DEL Motor Aviso Conecte el manubrio y bandeja accesoria MontajeDesembale la limpiadora a presión Los artículos que se encuentran en la caja sonEl combustible debe reunir los siguientes requisitos Agregar aceite al motorAgregue combustible Gran altitudConecte la manguera y el suministro de agua a la bomba Lista de revision previa al arranque del motorProporcione el suministro de agua adecuado Características y mandos Usar cuatro boquillas diferentesCómo darle arranque a su máquina limpiadora a presión OperandoUbicación del limpiadora a presión Espacio libre alrededor del limpiadora a presiónAhogado Choke Cómo detener su máquina limpiadora a presión Cuando arranque el motor, mueva lentamente laRepite los pasos 11 por La Presión Baja Utilización de la bandeja de accesoriosCómo usar las boquillas ProjectPro La Presión AltaUso inclina Limpieza y aplicación del detergenteElija la boquilla ProjectPro que desee Para aplicar el detergente, siga los siguientes pasosSistema de enfriamiento automático alivio térmico Enjuage de la máquina limpiadora a presiónLimpieza del tubo de inyección de detergente Para EnjuageMantenimiento Plan de mantenimientoMantenimiento de la limpiadora a presión Chequee el tubo de sifón del detergente Revise y limpie el colador de entradaRevise la manguera de alta presión Revise la pistola y la extensión para boquillasAceite Recomendaciones sobre el aceite Mantenimiento del motorMantenimiento de los anillos o Comprobación del nivel de aceiteServicio del depurador de aire Cambio de aceite del motorAsegúrese de que la unidad esté en una superficie plana Servicio del bujíaDespues de cada uso Servicio del apagachispasSistema de refrigeración de aire Almacenamiento para invierno Almacenamiento prolongadoResolución de problemas Problema Causa SoluciónGarantía del sistema de control de emisiones Responsabilidades de la garantía del propietarioInformación sobre emisiones Garantía Limitada Especificaciones del producto Servicio común despideTemperatura del suministro

020274-0 specifications

Briggs & Stratton 020274-0 is a highly regarded portable generator that provides reliable power solutions for a variety of applications, including recreational activities, job sites, and emergency backup needs. This generator is known for its robustness, efficiency, and user-friendly design, making it a go-to choice for many consumers.

One of the key features of the Briggs & Stratton 020274-0 is its powerful engine. Equipped with a reliable 210cc OHV engine, it delivers a peak power output of 3,300 watts and a running power of 2,650 watts. This capacity is sufficient for running essential household appliances during power outages or providing energy for tools and equipment on job sites. The generator offers both 120V and 120/240V outlets, ensuring versatility for various applications.

Another notable characteristic of this generator is its lightweight and compact design. Weighing in at approximately 68 pounds, it is relatively easy to transport and maneuver, thanks to its integrated handle and rugged wheels. This portability feature is essential for users who need to move the generator between locations frequently.

The Briggs & Stratton 020274-0 also incorporates advanced technologies aimed at enhancing efficiency and performance. The generator utilizes a surge protection feature that safeguards connected devices from power surges, ensuring their longevity and reliability. Additionally, it features an automatic idle control system that reduces fuel consumption by lowering engine speed when not in use, thereby extending the runtime and minimizing operational costs.

The generator is designed with user convenience in mind. The control panel is intuitively laid out, providing easy access to power outlets and switches. The fuel tank has a generous capacity of 1.5 gallons, offering a runtime of up to 9 hours at a 25% load, making it ideal for longer use without the need for frequent refueling.

Moreover, the Briggs & Stratton 020274-0 comes with a range of safety features, including a low-oil shutdown system that prevents engine damage by automatically shutting off the generator when oil levels fall below a safe threshold. This feature extends the life of the generator and ensures dependable performance over time.

In summary, the Briggs & Stratton 020274-0 portable generator stands out with its powerful performance, user-friendly features, and advanced technologies. Its reliability, ease of use, and safety mechanisms make it an excellent choice for both home and professional use, delivering peace of mind when you need power the most.
Top Page Image Contents