Briggs & Stratton 020274-0 manual Check High Pressure Hose, Check Detergent Siphoning Tube

Page 19

Check High Pressure Hose

The high pressure hose can develop leaks from wear, kinking, or abuse. Inspect the hose each time before using it. Check for cuts, leaks, abrasions or bulging of cover, damage or movement of couplings. If any of these conditions exist, replace the hose immediately.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

•NEVER repair high pressure hose. Replace it.

•Replacement hose rating MUST exceed maximum pressure rating of unit.

Check Detergent Siphoning Tube

Examine the filter on the detergent tube and clean if clogged. The tube should fit tightly on the barbed fitting. Examine the tube for leaks or tears. Replace the filter or tube if either is damaged.

Check Gun and Nozzle Extension

Examine the hose connection to the spray gun and make sure it is secure. Test the trigger by pressing the red button and making sure the trigger “springs back” into place when you release it. You should not be able to press the trigger without pressing the red button. Replace spray gun immediately if it fails any of these tests.

Nozzle Maintenance

A pulsing sensation felt while squeezing the spray gun trigger may be caused by excessive pump pressure. The principal cause of excessive pump pressure is a nozzle clogged or restricted with foreign materials, such as dirt, etc. To correct the problem, immediately clean the nozzle following these instructions:

1.Shut off engine and turn off water supply.

2.ALWAYS point spray gun in a safe direction, press red button and squeeze spray gun trigger to release retained high water pressure.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•ALWAYS point spray gun in safe direction, press red button and squeeze spray gun trigger, to release high pressure, every time you stop engine.

3.Remove nozzle from end of nozzle extension.

4.Use a small paper clip to free any foreign material clogging or restricting nozzle (A).

A

5.Remove nozzle extension from spray gun.

6.Using a garden hose, remove additional debris by back flushing water through nozzle extension. Back flush between 30 to 60 seconds.

7.Reinstall nozzle into nozzle extension.

8.Reconnect nozzle extension to spray gun.

9.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump. Turn on water.

10.Start engine following instructions How to Start Your Pressure Washer.

11.Test pressure washer by operating with each quick connect nozzle.

O-Ring Maintenance

Purchase an O-Ring/Maintenance Kit, model 6048, by contacting the nearest authorized service center. It is not included with the pressure washer. This kit includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

•NEVER repair leaking connections with sealant of any kind. Replace o-ring or seal.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operator’s Manual Date Purchased Where to Find UsPressure Washer EngineTable of Contents Equipment Description Operator SafetySafety Rules Hazard Symbols and MeaningsOperate pressure washer only outdoors Certain components in this product and relatedContact with muffler area can result in serious burns Broken bones, fractures, bruises, or sprains could resultUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Risk of eye injury Spray can splash back or propel objectsItems in the carton include AssemblyAttach Handle and Accessory Tray Unpack Pressure WasherHigh Altitude Add Engine OilAdd Fuel Fuel must meet these requirementsConnect Hose and Water Supply to Pump Checklist Before Starting EngineOil Drain Drain engine oil here Features and ControlsPressure Washer Location OperationClearances and Air Movement How to Start Your Pressure Washer Lever to Choke position, then to Run position How to Stop Your Pressure WasherHow to Use ProjectPro Nozzles How to Use Accessory TrayFollow these instructions to change ProjectPro nozzles Usage Tips Cleaning and Applying DetergentTo apply detergent, follow these steps For Rinsing Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down System Thermal ReliefMaintenance Schedule MaintenancePressure Washer Maintenance Check Detergent Siphoning Tube Nozzle MaintenanceRing Maintenance Check High Pressure HoseAdding Engine Oil Engine MaintenanceOil Oil Recommendations Checking Oil LevelInstall spark plug and tighten firmly Service Air CleanerTo service the air cleaner, follow these steps Service Spark PlugAir Cooling System After Each UseKeep areas within heavy line clear of debris Long Term Storage Winter StorageProblem Cause Correction TroubleshootingOwner’s Warranty Responsibilities Emissions Control System WarrantyWarranties Emission Information MaintenanceClaims and Coverage Exclusions Limited Warranty Common Service Parts Product Specifications800 Manual del Operario Fecha de compra Dónde encontrarnosLimpiadora a Presión MotorCaracterísticas y mandos Operando Resolución de problemas GarantíasSeguridad de Operario MontajeSímbolos de Peligro y Significados Seguridad de OperarioDerscripción del equipo Reglas de seguridadRiesgo de electrocución AdvertenciaCuando Pruebe LA Bujía DEL Motor Aviso Los artículos que se encuentran en la caja son MontajeDesembale la limpiadora a presión Conecte el manubrio y bandeja accesoriaGran altitud Agregar aceite al motorAgregue combustible El combustible debe reunir los siguientes requisitosLista de revision previa al arranque del motor Conecte la manguera y el suministro de agua a la bombaProporcione el suministro de agua adecuado Usar cuatro boquillas diferentes Características y mandosEspacio libre alrededor del limpiadora a presión OperandoUbicación del limpiadora a presión Cómo darle arranque a su máquina limpiadora a presiónAhogado Choke Cuando arranque el motor, mueva lentamente la Cómo detener su máquina limpiadora a presiónRepite los pasos 11 por La Presión Alta Utilización de la bandeja de accesoriosCómo usar las boquillas ProjectPro La Presión BajaPara aplicar el detergente, siga los siguientes pasos Limpieza y aplicación del detergenteElija la boquilla ProjectPro que desee Uso inclinaPara Enjuage Enjuage de la máquina limpiadora a presiónLimpieza del tubo de inyección de detergente Sistema de enfriamiento automático alivio térmicoPlan de mantenimiento MantenimientoMantenimiento de la limpiadora a presión Revise la pistola y la extensión para boquillas Revise y limpie el colador de entradaRevise la manguera de alta presión Chequee el tubo de sifón del detergenteComprobación del nivel de aceite Mantenimiento del motorMantenimiento de los anillos o Aceite Recomendaciones sobre el aceiteServicio del bujía Cambio de aceite del motorAsegúrese de que la unidad esté en una superficie plana Servicio del depurador de aireServicio del apagachispas Despues de cada usoSistema de refrigeración de aire Almacenamiento prolongado Almacenamiento para inviernoProblema Causa Solución Resolución de problemasResponsabilidades de la garantía del propietario Garantía del sistema de control de emisionesInformación sobre emisiones Garantía Limitada Servicio común despide Especificaciones del productoTemperatura del suministro

020274-0 specifications

Briggs & Stratton 020274-0 is a highly regarded portable generator that provides reliable power solutions for a variety of applications, including recreational activities, job sites, and emergency backup needs. This generator is known for its robustness, efficiency, and user-friendly design, making it a go-to choice for many consumers.

One of the key features of the Briggs & Stratton 020274-0 is its powerful engine. Equipped with a reliable 210cc OHV engine, it delivers a peak power output of 3,300 watts and a running power of 2,650 watts. This capacity is sufficient for running essential household appliances during power outages or providing energy for tools and equipment on job sites. The generator offers both 120V and 120/240V outlets, ensuring versatility for various applications.

Another notable characteristic of this generator is its lightweight and compact design. Weighing in at approximately 68 pounds, it is relatively easy to transport and maneuver, thanks to its integrated handle and rugged wheels. This portability feature is essential for users who need to move the generator between locations frequently.

The Briggs & Stratton 020274-0 also incorporates advanced technologies aimed at enhancing efficiency and performance. The generator utilizes a surge protection feature that safeguards connected devices from power surges, ensuring their longevity and reliability. Additionally, it features an automatic idle control system that reduces fuel consumption by lowering engine speed when not in use, thereby extending the runtime and minimizing operational costs.

The generator is designed with user convenience in mind. The control panel is intuitively laid out, providing easy access to power outlets and switches. The fuel tank has a generous capacity of 1.5 gallons, offering a runtime of up to 9 hours at a 25% load, making it ideal for longer use without the need for frequent refueling.

Moreover, the Briggs & Stratton 020274-0 comes with a range of safety features, including a low-oil shutdown system that prevents engine damage by automatically shutting off the generator when oil levels fall below a safe threshold. This feature extends the life of the generator and ensures dependable performance over time.

In summary, the Briggs & Stratton 020274-0 portable generator stands out with its powerful performance, user-friendly features, and advanced technologies. Its reliability, ease of use, and safety mechanisms make it an excellent choice for both home and professional use, delivering peace of mind when you need power the most.
Top Page Image Contents