Briggs & Stratton 020274-0 manual Engine Maintenance, Oil Oil Recommendations, Checking Oil Level

Page 20

Engine Maintenance

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

Oil

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty Certified oils for best performance. Other high-quality detergent oils are acceptable if classified for service SF, SG, SH, SJ or higher. DO NOT use special additives.

Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best viscosity for the outdoor temperature range expected.

* Below 40°F (4°C) the use of SAE 30 will result in hard starting.

**Above 80°F (27°C) the use of 10W30 may cause increased oil consumption. Check oil level more frequently.

NOTE: Synthetic oil meeting ILSAC GF-2, API

certification mark and API service symbol with

“SJ/CF ENERGY CONSERVING” or higher, is an

acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.

Checking Oil Level

Oil level should be checked prior to each use or at least every 8 hours of operation. Keep oil level maintained.

1.Make sure pressure washer is on a level surface.

2.Clean area around oil fill and remove oil fill cap.

3.Verify oil is at the point of overflowing at oil fill opening.

4.Replace and tighten oil fill cap.

Adding Engine Oil

1.Make sure pressure washer is on a level surface.

2.Check oil level as described in Checking Oil Level.

3.If needed, slowly pour oil into oil fill opening to the point of overflowing at oil fill.

4.Replace and tighten oil fill cap.

Changing Engine Oil

Change the engine oil after the first 5 hours and every

50 hours thereafter. If you are using your pressure washer under extremely dirty or dusty conditions, or in extremely hot weather, change the oil more often.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

•Used motor oil has been shown to cause skin cancer in certain laboratory animals.

•Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON’T

POLLUTE. CONSERVE RESOURCES. RETURN

USED OIL TO COLLECTION CENTERS.

Change oil while engine is still warm from running, as follows:

1.Make sure unit is on a level surface.

2.Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

3.Clean area around oil drain plug (A). The oil drain plug is located at base of engine, opposite carburetor.

A

C

B

20

BRIGGSandSTRATTON.COM

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator’s Manual Where to Find Us Pressure WasherEngine Date PurchasedTable of Contents Operator Safety Safety RulesHazard Symbols and Meanings Equipment DescriptionCertain components in this product and related Operate pressure washer only outdoorsUnintentional sparking can result in fire or electric shock Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAssembly Attach Handle and Accessory TrayUnpack Pressure Washer Items in the carton includeAdd Engine Oil Add FuelFuel must meet these requirements High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpFeatures and Controls Oil Drain Drain engine oil hereClearances and Air Movement OperationPressure Washer Location How to Start Your Pressure Washer How to Stop Your Pressure Washer Lever to Choke position, then to Run positionFollow these instructions to change ProjectPro nozzles How to Use Accessory TrayHow to Use ProjectPro Nozzles To apply detergent, follow these steps Cleaning and Applying DetergentUsage Tips Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief For RinsingPressure Washer Maintenance MaintenanceMaintenance Schedule Nozzle Maintenance Ring MaintenanceCheck High Pressure Hose Check Detergent Siphoning TubeEngine Maintenance Oil Oil RecommendationsChecking Oil Level Adding Engine OilService Air Cleaner To service the air cleaner, follow these stepsService Spark Plug Install spark plug and tighten firmlyKeep areas within heavy line clear of debris After Each UseAir Cooling System Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionWarranties Emissions Control System WarrantyOwner’s Warranty Responsibilities Claims and Coverage Exclusions MaintenanceEmission Information Limited Warranty 800 Product SpecificationsCommon Service Parts Manual del Operario Dónde encontrarnos Limpiadora a PresiónMotor Fecha de compraResolución de problemas Garantías Seguridad de OperarioMontaje Características y mandos OperandoSeguridad de Operario Derscripción del equipoReglas de seguridad Símbolos de Peligro y SignificadosAdvertencia Riesgo de electrocuciónCuando Pruebe LA Bujía DEL Motor Aviso Montaje Desembale la limpiadora a presiónConecte el manubrio y bandeja accesoria Los artículos que se encuentran en la caja sonAgregar aceite al motor Agregue combustibleEl combustible debe reunir los siguientes requisitos Gran altitudProporcione el suministro de agua adecuado Conecte la manguera y el suministro de agua a la bombaLista de revision previa al arranque del motor Características y mandos Usar cuatro boquillas diferentesOperando Ubicación del limpiadora a presiónCómo darle arranque a su máquina limpiadora a presión Espacio libre alrededor del limpiadora a presiónAhogado Choke Repite los pasos 11 por Cómo detener su máquina limpiadora a presiónCuando arranque el motor, mueva lentamente la Utilización de la bandeja de accesorios Cómo usar las boquillas ProjectProLa Presión Baja La Presión AltaLimpieza y aplicación del detergente Elija la boquilla ProjectPro que deseeUso inclina Para aplicar el detergente, siga los siguientes pasosEnjuage de la máquina limpiadora a presión Limpieza del tubo de inyección de detergenteSistema de enfriamiento automático alivio térmico Para EnjuageMantenimiento de la limpiadora a presión MantenimientoPlan de mantenimiento Revise y limpie el colador de entrada Revise la manguera de alta presiónChequee el tubo de sifón del detergente Revise la pistola y la extensión para boquillasMantenimiento del motor Mantenimiento de los anillos oAceite Recomendaciones sobre el aceite Comprobación del nivel de aceiteCambio de aceite del motor Asegúrese de que la unidad esté en una superficie planaServicio del depurador de aire Servicio del bujíaSistema de refrigeración de aire Despues de cada usoServicio del apagachispas Almacenamiento para invierno Almacenamiento prolongadoResolución de problemas Problema Causa SoluciónGarantía del sistema de control de emisiones Responsabilidades de la garantía del propietarioInformación sobre emisiones Garantía Limitada Temperatura del suministro Especificaciones del productoServicio común despide

020274-0 specifications

Briggs & Stratton 020274-0 is a highly regarded portable generator that provides reliable power solutions for a variety of applications, including recreational activities, job sites, and emergency backup needs. This generator is known for its robustness, efficiency, and user-friendly design, making it a go-to choice for many consumers.

One of the key features of the Briggs & Stratton 020274-0 is its powerful engine. Equipped with a reliable 210cc OHV engine, it delivers a peak power output of 3,300 watts and a running power of 2,650 watts. This capacity is sufficient for running essential household appliances during power outages or providing energy for tools and equipment on job sites. The generator offers both 120V and 120/240V outlets, ensuring versatility for various applications.

Another notable characteristic of this generator is its lightweight and compact design. Weighing in at approximately 68 pounds, it is relatively easy to transport and maneuver, thanks to its integrated handle and rugged wheels. This portability feature is essential for users who need to move the generator between locations frequently.

The Briggs & Stratton 020274-0 also incorporates advanced technologies aimed at enhancing efficiency and performance. The generator utilizes a surge protection feature that safeguards connected devices from power surges, ensuring their longevity and reliability. Additionally, it features an automatic idle control system that reduces fuel consumption by lowering engine speed when not in use, thereby extending the runtime and minimizing operational costs.

The generator is designed with user convenience in mind. The control panel is intuitively laid out, providing easy access to power outlets and switches. The fuel tank has a generous capacity of 1.5 gallons, offering a runtime of up to 9 hours at a 25% load, making it ideal for longer use without the need for frequent refueling.

Moreover, the Briggs & Stratton 020274-0 comes with a range of safety features, including a low-oil shutdown system that prevents engine damage by automatically shutting off the generator when oil levels fall below a safe threshold. This feature extends the life of the generator and ensures dependable performance over time.

In summary, the Briggs & Stratton 020274-0 portable generator stands out with its powerful performance, user-friendly features, and advanced technologies. Its reliability, ease of use, and safety mechanisms make it an excellent choice for both home and professional use, delivering peace of mind when you need power the most.
Top Page Image Contents