Briggs & Stratton 020364-0 manual How to Stop Your Pressure Washer

Page 15

WARNING

Starter cord kickback (rapid retraction) can result in bodily injury. Kickback will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises, or sprains could result.

•NEVER pull starter cord without first relieving spray gun pressure.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•After each starting attempt, where engine fails to run, always point spray gun in safe direction and squeeze spray gun trigger to release high pressure. Engage spray gun trigger lock.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back.

14.Return starter grip handle slowly. DO NOT let rope “snap back” against starter.

15.When engine starts, slowly move choke lever to “Run”

position, as engine warms. If engine falters, move choke

lever to “Choke” position, then to “Run” position.

16.After each starting attempt, where engine fails to run, always point gun in safe direction and squeeze spray gun trigger to release high pressure.

17.If engine fails to start after six pulls, move choke lever

to “Run” position, and repeat steps 13 through 15.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•DO NOT allow CHILDREN to operate pressure washer.

•Keep high pressure hoses connected to pump, hose reel and spray gun while system is pressurized.

•NEVER aim spray gun at people, animals, or plants.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot parts and AVOID hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 feet (1.5 m) of clearance on all sides of pressure washer including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

How to Stop Your Pressure Washer

1.Release spray gun trigger and let engine idle for two minutes.

2.Move throttle control lever on engine to “Stop” position.

3.ALWAYS point spray gun in a safe direction and squeeze spray gun trigger to release retained high water pressure.

WARNING

The high pressure stream of water that this equipment produces can cut through skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun traps high water pressure, even when engine is stopped and water is disconnected, which can cause injury.

•Keep high pressure hoses connected to pump, hose reel and spray gun while system is pressurized.

•ALWAYS point spray gun in safe direction and squeeze spray gun trigger, to release high pressure, every time you stop engine. Engage trigger lock when not in use.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

4. Engage trigger lock on spray gun when not in use.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operator’s Manual Date Purchased Where to Find UsPressure Washer EngineTable of Contents Equipment Description Operator SafetySafety Rules Hazard Symbols and MeaningsWhen Adding or Draining Fuel Broken bones, fractures, bruises, or sprains could result Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Risk of eye injury Spray can splash back or propel objectsItems in the carton include AssemblyAttach Handle and Accessory Tray Unpack Pressure WasherAttach Hose Reel High Altitude Add Engine OilAdd Fuel Fuel must meet these requirementsConnect Hose and Water Supply to Pump Checklist Before Starting EngineFeatures and Controls Water Inlet Connection for garden hoseOil Drain Drain engine oil here Pump Develops high pressure Operation Pressure Washer LocationClearances and Air Movement Attach nozzle extension to spray gun. Tighten by hand How to Start Your Pressure WasherHow to Stop Your Pressure Washer Engage trigger lock on spray gun when not in useLever to Choke position, then to Run position How to Use Accessory Tray How to Use Project Pro NozzlesFollow these instructions to change Project Pro nozzles Cleaning and Applying Detergent Usage TipsTo apply detergent, follow these steps For Rinsing Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down System Thermal ReliefMaintenance Maintenance SchedulePressure Washer Maintenance Check Detergent Siphoning Tube Nozzle MaintenanceRing Maintenance Check High Pressure HosesAdding Engine Oil Engine MaintenanceOil Oil Recommendations Checking Oil LevelSpark Arrester Service Service Air CleanerTo service the air cleaner, follow these steps Service Spark PlugAfter Each Use Long Term Storage Winter StorageProblem Cause Correction TroubleshootingEmissions Control System Warranty Owner’s Warranty ResponsibilitiesWarranties Maintenance Emission InformationClaims and Coverage Exclusions Limited Warranty Page Product Specifications Common Service Parts800 Manual del Operario Fecha de compra Dónde encontrarnosLimpiadora a Presión MotorCaracterísticas y mandos Operando Resolución de problemas GarantíasSeguridad de Operario MontajeSeguridad de Operario Derscripción del EquipoReglas de seguridad Opere el limpiadora a presión Solamente al aire libre Riesgo de electrocuciónCuando Pruebe LA Bujía DEL Motor Aviso Los artículos que se encuentran en la caja son MontajeDesembale la limpiadora a presión Conecte el asa y bandeja accesoriaFije el carrete de manguera Gran altitud Agregar aceite al motorAgregue combustible El combustible debe reunir los siguientes requisitosConecte la manguera y el suministro de agua a la bomba Lista de revision previa al arranque del motorProporcione el suministro de agua adecuado Bomba Desarrolla alta presión de agua Características y mandosCómo darle arranque a su máquina limpiadora a OperandoPresión Ubicación del limpiadora a presiónAdvertencia Cuando arranque el motor, mueva lentamente la Cómo detener su máquina limpiadora a presiónLa Presión Alta Utilización de la bandeja de accesoriosCómo usar las boquillas Project Pro La Presión BajaPara aplicar el detergente, siga los siguientes pasos Limpieza y aplicación del detergenteElija la boquilla Project Pro que desee Uso inclinaPara Enjuage Enjuage de la máquina limpiadora a presiónLimpieza del tubo de inyección de detergente Sistema de enfriamiento automático alivio térmicoMantenimiento Plan de mantenimientoMantenimiento de la limpiadora a presión Revise la pistola Revise y limpie el colador de entradaCompruebe las mangueras de alta presión Chequee el tubo de sifón del detergenteMantenimiento del motor Servicio del bujía Asegúrese de que la unidad esté en una superficie planaServicio del depurador de aire Suministre servicio al depurador de aire una vez cadaDespues de cada uso Sistema de refrigeración de aireLimpie Almacenamiento prolongado Almacenamiento para inviernoProblema Causa Solución Resolución de problemasGarantías Garantía del sistema de control de emisionesResponsabilidades de la garantía del propietario Información sobre emisiones Garantía Limitada Page Especificaciones del producto Servicio común despideTemperatura del suministro

020364-0 specifications

The Briggs & Stratton 020364-0 is a robust and efficient small engine designed for a variety of outdoor power equipment applications. This engine is particularly well-regarded in the lawn care and garden equipment industries, owing to its reliability, performance, and ease of maintenance.

One of the standout features of the Briggs & Stratton 020364-0 is its powerful 6.75 foot-pounds of torque output. This engine's overhead valve design enhances fuel efficiency and provides improved performance across different operating conditions. The engine utilizes a 190cc displacement which allows for a higher level of power delivery, making it suitable for demanding tasks such as mowing larger lawns or heavy-duty garden work.

In addition to its power, the 020364-0 comes with an easy-start recoil system, which reduces the effort required to start the engine. This feature is particularly beneficial for users who may prefer a hassle-free experience when starting their lawn mowers or other equipment. The engine’s design includes a float carburetor that optimizes fuel delivery and efficiency, ensuring that the engine runs smoothly even in varying temperature and altitude conditions.

The Briggs & Stratton 020364-0 is also built with user convenience in mind. It is equipped with a dual-element air filter that protects the engine from dirt and debris, extending the engine's lifespan and reducing the need for frequent maintenance. Furthermore, the engine features a durable cast iron cylinder sleeve, enhancing its resistance to wear and improving its performance longevity.

Another important characteristic is its lightweight design, which facilitates easier maneuverability when installed in different power equipment. Users appreciate the efficiency of this engine, as it often translates to lower operational costs over time.

Given its reliable performance, innovative technologies, and user-friendly features, the Briggs & Stratton 020364-0 is an excellent choice for anyone in need of a dependable engine for various outdoor applications. Whether you are a professional landscaper or a homeowner maintaining a garden, this engine guarantees robust power and durability in every task.
Top Page Image Contents