Briggs & Stratton 020364-0 manual Warranties, Emissions Control System Warranty

Page 26

Warranties

Emissions Control System Warranty

Briggs & Stratton Corporation (B&S), the California Air Resources Board (CARB) and the United States Environmental Protection Agency (U.S. EPA)

Emissions Control System Warranty Statement (Owner’s Defect Warranty Rights and Obligations)

California, United States and Canada Emissions Control Defects Warranty Statement

The California Air Resources Board (CARB), U.S. EPA and B&S are pleased to explain the Emissions Control System Warranty on your small off-road engine (SORE). In California, new small off-road engines model year 2006 and later must be designed, built and equipped to meet the State’s stringent anti-smog standards. Elsewhere in the United States, new non-road, spark-ignition engines certified for model year 1997 and later must meet similar standards set forth by the U.S. EPA. B&S must warrant the emissions control system on your engine for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your small off-road engine.

Your emissions control system includes parts such as the carburetor, air cleaner, ignition system, fuel line, muffler and catalytic converter. Also included may be connectors and other emissions related assemblies.

Where a warrantable condition exists, B&S will repair your small off-road engine at no cost to you including diagnosis, parts and labor.

Briggs & Stratton Emissions Control Defects Warranty Coverage

Small off-road engines are warranted relative to emissions control parts defects for a period of two years, subject to provisions set forth below. If any covered part on your engine is defective, the part will be repaired or replaced by B&S.

Owner’s Warranty Responsibilities

As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your Operating and Maintenance Instructions. B&S recommends that you retain all your receipts covering maintenance on your small off-road engine, but B&S cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

As the small off-road engine owner, you should however be aware that B&S may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your small off-road engine to an Authorized B&S Service Dealer as soon as a problem exists. The undisputed warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact a B&S Service Representative at (414) 259-5262.

The emissions warranty is a defects warranty. Defects are judged on normal engine performance. The warranty is not related to an in-use emissions test.

Briggs & Stratton Emissions Control Defects Warranty Provisions

The following are specific provisions relative to your Emissions Control Defects Warranty Coverage. It is in addition to the B&S engine warranty for non-regulated engines found in the Operator’s Manual.

1.Warranted Parts

Coverage under this warranty extends only to the parts listed below (the emissions control systems parts) to the extent these parts were present on the engine purchased.

a.Fuel Metering System

•Cold start enrichment system (soft choke)

•Carburetor and internal parts

•Fuel Pump

•Fuel line, fuel line fittings, clamps

•Fuel tank, cap and tether

•Carbon canister

b.Air Induction System

•Air cleaner

•Intake manifold

•Purge and vent line

c.Ignition System

•Spark plug(s)

•Magneto ignition system

d.Catalyst System

•Catalytic converter

•Exhaust manifold

•Air injection system or pulse valve

e.Miscellaneous Items Used in Above Systems

•Vacuum, temperature, position, time sensitive valves and switches

•Connectors and assemblies

26

BRIGGSandSTRATTON.COM

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operator’s Manual Engine Where to Find UsPressure Washer Date PurchasedTable of Contents Hazard Symbols and Meanings Operator SafetySafety Rules Equipment DescriptionWhen Adding or Draining Fuel Unintentional sparking can result in fire or electric shock Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassUnpack Pressure Washer AssemblyAttach Handle and Accessory Tray Items in the carton includeAttach Hose Reel Fuel must meet these requirements Add Engine OilAdd Fuel High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpOil Drain Drain engine oil here Pump Develops high pressure Features and ControlsWater Inlet Connection for garden hose Clearances and Air Movement OperationPressure Washer Location How to Start Your Pressure Washer Attach nozzle extension to spray gun. Tighten by handLever to Choke position, then to Run position How to Stop Your Pressure WasherEngage trigger lock on spray gun when not in use Follow these instructions to change Project Pro nozzles How to Use Accessory TrayHow to Use Project Pro Nozzles To apply detergent, follow these steps Cleaning and Applying DetergentUsage Tips Automatic Cool Down System Thermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing For RinsingPressure Washer Maintenance MaintenanceMaintenance Schedule Check High Pressure Hoses Nozzle MaintenanceRing Maintenance Check Detergent Siphoning TubeChecking Oil Level Engine MaintenanceOil Oil Recommendations Adding Engine OilService Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Spark Arrester ServiceAfter Each Use Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionWarranties Emissions Control System WarrantyOwner’s Warranty Responsibilities Claims and Coverage Exclusions MaintenanceEmission Information Limited Warranty Page 800 Product SpecificationsCommon Service Parts Manual del Operario Motor Dónde encontrarnosLimpiadora a Presión Fecha de compraMontaje Resolución de problemas GarantíasSeguridad de Operario Características y mandos OperandoReglas de seguridad Seguridad de OperarioDerscripción del Equipo Riesgo de electrocución Opere el limpiadora a presión Solamente al aire libreCuando Pruebe LA Bujía DEL Motor Aviso Conecte el asa y bandeja accesoria MontajeDesembale la limpiadora a presión Los artículos que se encuentran en la caja sonFije el carrete de manguera El combustible debe reunir los siguientes requisitos Agregar aceite al motorAgregue combustible Gran altitudProporcione el suministro de agua adecuado Conecte la manguera y el suministro de agua a la bombaLista de revision previa al arranque del motor Características y mandos Bomba Desarrolla alta presión de aguaUbicación del limpiadora a presión OperandoPresión Cómo darle arranque a su máquina limpiadora aAdvertencia Cómo detener su máquina limpiadora a presión Cuando arranque el motor, mueva lentamente laLa Presión Baja Utilización de la bandeja de accesoriosCómo usar las boquillas Project Pro La Presión AltaUso inclina Limpieza y aplicación del detergenteElija la boquilla Project Pro que desee Para aplicar el detergente, siga los siguientes pasosSistema de enfriamiento automático alivio térmico Enjuage de la máquina limpiadora a presiónLimpieza del tubo de inyección de detergente Para EnjuageMantenimiento de la limpiadora a presión MantenimientoPlan de mantenimiento Chequee el tubo de sifón del detergente Revise y limpie el colador de entradaCompruebe las mangueras de alta presión Revise la pistolaMantenimiento del motor Suministre servicio al depurador de aire una vez cada Asegúrese de que la unidad esté en una superficie planaServicio del depurador de aire Servicio del bujíaLimpie Despues de cada usoSistema de refrigeración de aire Almacenamiento para invierno Almacenamiento prolongadoResolución de problemas Problema Causa SoluciónResponsabilidades de la garantía del propietario GarantíasGarantía del sistema de control de emisiones Información sobre emisiones Garantía Limitada Page Temperatura del suministro Especificaciones del productoServicio común despide

020364-0 specifications

The Briggs & Stratton 020364-0 is a robust and efficient small engine designed for a variety of outdoor power equipment applications. This engine is particularly well-regarded in the lawn care and garden equipment industries, owing to its reliability, performance, and ease of maintenance.

One of the standout features of the Briggs & Stratton 020364-0 is its powerful 6.75 foot-pounds of torque output. This engine's overhead valve design enhances fuel efficiency and provides improved performance across different operating conditions. The engine utilizes a 190cc displacement which allows for a higher level of power delivery, making it suitable for demanding tasks such as mowing larger lawns or heavy-duty garden work.

In addition to its power, the 020364-0 comes with an easy-start recoil system, which reduces the effort required to start the engine. This feature is particularly beneficial for users who may prefer a hassle-free experience when starting their lawn mowers or other equipment. The engine’s design includes a float carburetor that optimizes fuel delivery and efficiency, ensuring that the engine runs smoothly even in varying temperature and altitude conditions.

The Briggs & Stratton 020364-0 is also built with user convenience in mind. It is equipped with a dual-element air filter that protects the engine from dirt and debris, extending the engine's lifespan and reducing the need for frequent maintenance. Furthermore, the engine features a durable cast iron cylinder sleeve, enhancing its resistance to wear and improving its performance longevity.

Another important characteristic is its lightweight design, which facilitates easier maneuverability when installed in different power equipment. Users appreciate the efficiency of this engine, as it often translates to lower operational costs over time.

Given its reliable performance, innovative technologies, and user-friendly features, the Briggs & Stratton 020364-0 is an excellent choice for anyone in need of a dependable engine for various outdoor applications. Whether you are a professional landscaper or a homeowner maintaining a garden, this engine guarantees robust power and durability in every task.
Top Page Image Contents