Briggs & Stratton 020364-0 Assembly, Unpack Pressure Washer, Attach Handle and Accessory Tray

Page 8

Assembly

Read entire operator’s manual before you attempt to assemble or operate your new pressure washer.

Your pressure washer requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your pressure washer, please call the pressure washer helpline at

(800)743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available.

Unpack Pressure Washer

1.Remove the parts bag, accessories, and inserts included with pressure washer.

2.Open carton completely by cutting each corner from top to bottom.

3.Ensure you have all included items prior to assembly.

Items in the carton include:

•Main Unit

•Handle

•Short High Pressure Hose

•High Pressure Hose

•Spray Gun

•Nozzle Extension with Quick Connect Fitting

•Plastic Accessory Tray

•Hose Reel Components

•Oil Bottle

•Parts Bag (which includes the following):

•Safety Goggles

•Spray Gun Holder Wireform

•Operator’s Manual

•Owner’s Registration Card

•Bag containing 4 Multi–Colored Project Pro® Nozzles

•Handle Fastening Hardware Kit (which includes):

•Carriage Bolts (2)

•Plastic Knobs (3)

•Tree Clips (4)

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Fill out and send in registration card.

2.Attach handle and accessory tray to main unit.

3.Attach hose reel to handle.

4.Add oil to engine crankcase.

5.Add fuel to fuel tank.

6.Connect high pressure hoses to spray gun, hose reel and pump.

7.Connect water supply to pump.

8.Attach nozzle extension to spray gun.

9.Select/attach quick connect Project Pro® nozzle to nozzle extension.

Attach Handle and Accessory Tray

1.Place handle (A) onto handle supports (B) connected to main unit. Make sure holes (C) in handle align with holes (C) on handle supports.

A

C

B

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

2.Insert carriage bolts (D) through holes from back of unit and attach a plastic knob (E) from front of unit. Tighten by hand.

E

D

3.Place accessory tray (F) over holes (H) on handle (viewing from front of unit). Push the tree clips (G) into the holes until they sit flat against the accessory tray.

H

G

F

4.Insert spray gun holder wireform (J) through hole on left side of handle (viewing from front of unit). Hold wireform in place and attach a plastic knob (K) from inside of unit. Tighten by hand.

K

J

5.Insert multi–colored Project Pro® nozzles in spaces provided in accessory tray. See How to Use Accessory Tray.

8

BRIGGSandSTRATTON.COM

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operator’s Manual Where to Find Us Pressure WasherEngine Date PurchasedTable of Contents Operator Safety Safety RulesHazard Symbols and Meanings Equipment DescriptionWhen Adding or Draining Fuel Unintentional sparking can result in fire or electric shock Broken bones, fractures, bruises, or sprains could resultContact with muffler area can result in serious burns Risk of eye injury Spray can splash back or propel objects High pressure spray may damage fragile items including glassAssembly Attach Handle and Accessory TrayUnpack Pressure Washer Items in the carton includeAttach Hose Reel Add Engine Oil Add FuelFuel must meet these requirements High AltitudeChecklist Before Starting Engine Connect Hose and Water Supply to PumpOil Drain Drain engine oil here Pump Develops high pressure Features and ControlsWater Inlet Connection for garden hose Clearances and Air Movement OperationPressure Washer Location How to Start Your Pressure Washer Attach nozzle extension to spray gun. Tighten by handLever to Choke position, then to Run position How to Stop Your Pressure WasherEngage trigger lock on spray gun when not in use Follow these instructions to change Project Pro nozzles How to Use Accessory TrayHow to Use Project Pro Nozzles To apply detergent, follow these steps Cleaning and Applying DetergentUsage Tips Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief For RinsingPressure Washer Maintenance MaintenanceMaintenance Schedule Nozzle Maintenance Ring MaintenanceCheck High Pressure Hoses Check Detergent Siphoning TubeEngine Maintenance Oil Oil RecommendationsChecking Oil Level Adding Engine OilService Air Cleaner To service the air cleaner, follow these stepsService Spark Plug Spark Arrester ServiceAfter Each Use Winter Storage Long Term StorageTroubleshooting Problem Cause CorrectionWarranties Emissions Control System WarrantyOwner’s Warranty Responsibilities Claims and Coverage Exclusions MaintenanceEmission Information Limited Warranty Page 800 Product SpecificationsCommon Service Parts Manual del Operario Dónde encontrarnos Limpiadora a PresiónMotor Fecha de compraResolución de problemas Garantías Seguridad de OperarioMontaje Características y mandos OperandoReglas de seguridad Seguridad de OperarioDerscripción del Equipo Riesgo de electrocución Opere el limpiadora a presión Solamente al aire libreCuando Pruebe LA Bujía DEL Motor Aviso Montaje Desembale la limpiadora a presiónConecte el asa y bandeja accesoria Los artículos que se encuentran en la caja sonFije el carrete de manguera Agregar aceite al motor Agregue combustibleEl combustible debe reunir los siguientes requisitos Gran altitudProporcione el suministro de agua adecuado Conecte la manguera y el suministro de agua a la bombaLista de revision previa al arranque del motor Características y mandos Bomba Desarrolla alta presión de aguaOperando PresiónUbicación del limpiadora a presión Cómo darle arranque a su máquina limpiadora aAdvertencia Cómo detener su máquina limpiadora a presión Cuando arranque el motor, mueva lentamente laUtilización de la bandeja de accesorios Cómo usar las boquillas Project ProLa Presión Baja La Presión AltaLimpieza y aplicación del detergente Elija la boquilla Project Pro que deseeUso inclina Para aplicar el detergente, siga los siguientes pasosEnjuage de la máquina limpiadora a presión Limpieza del tubo de inyección de detergenteSistema de enfriamiento automático alivio térmico Para EnjuageMantenimiento de la limpiadora a presión MantenimientoPlan de mantenimiento Revise y limpie el colador de entrada Compruebe las mangueras de alta presiónChequee el tubo de sifón del detergente Revise la pistolaMantenimiento del motor Asegúrese de que la unidad esté en una superficie plana Servicio del depurador de aireSuministre servicio al depurador de aire una vez cada Servicio del bujíaLimpie Despues de cada usoSistema de refrigeración de aire Almacenamiento para invierno Almacenamiento prolongadoResolución de problemas Problema Causa SoluciónResponsabilidades de la garantía del propietario GarantíasGarantía del sistema de control de emisiones Información sobre emisiones Garantía Limitada Page Temperatura del suministro Especificaciones del productoServicio común despide

020364-0 specifications

The Briggs & Stratton 020364-0 is a robust and efficient small engine designed for a variety of outdoor power equipment applications. This engine is particularly well-regarded in the lawn care and garden equipment industries, owing to its reliability, performance, and ease of maintenance.

One of the standout features of the Briggs & Stratton 020364-0 is its powerful 6.75 foot-pounds of torque output. This engine's overhead valve design enhances fuel efficiency and provides improved performance across different operating conditions. The engine utilizes a 190cc displacement which allows for a higher level of power delivery, making it suitable for demanding tasks such as mowing larger lawns or heavy-duty garden work.

In addition to its power, the 020364-0 comes with an easy-start recoil system, which reduces the effort required to start the engine. This feature is particularly beneficial for users who may prefer a hassle-free experience when starting their lawn mowers or other equipment. The engine’s design includes a float carburetor that optimizes fuel delivery and efficiency, ensuring that the engine runs smoothly even in varying temperature and altitude conditions.

The Briggs & Stratton 020364-0 is also built with user convenience in mind. It is equipped with a dual-element air filter that protects the engine from dirt and debris, extending the engine's lifespan and reducing the need for frequent maintenance. Furthermore, the engine features a durable cast iron cylinder sleeve, enhancing its resistance to wear and improving its performance longevity.

Another important characteristic is its lightweight design, which facilitates easier maneuverability when installed in different power equipment. Users appreciate the efficiency of this engine, as it often translates to lower operational costs over time.

Given its reliable performance, innovative technologies, and user-friendly features, the Briggs & Stratton 020364-0 is an excellent choice for anyone in need of a dependable engine for various outdoor applications. Whether you are a professional landscaper or a homeowner maintaining a garden, this engine guarantees robust power and durability in every task.
Top Page Image Contents