Zenoah HTZ2401-CA, CHTZ2401L manual Limited Warranty

Page 53

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG, AIR FILTER,

FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF HOME USE, TWO (2) YEARS FOR COMMERCIAL USE AND NINETY (90) DAYS FOR RENTAL USE FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF HOME USE, TWO (2) YEARS FOR COMMERCIAL USE AND NINETY (90) DAYS FOR RENTAL USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL OUT THE CARD AND SEND IT TO RedMax / ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

ZENOAH AMERICA, INC.

1100 Laval Blvd. Suite 110

Lawrenceville, Georgia 30043

Page 52 Page 54
Image 53
Page 52 Page 54
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido Model SpecificationsParts location Fiche technique Emplacement des pieces Situación de las piezasEspecificaciohes ModeloSymbols on the machine Posición EmplacementWorking Circumstance For safe operationWorking Condition Circunstancias DE Trabajo Conditions DE TravailCondición DE Trabajo Before Starting the Engine Working PlanAvant DE Mettre LE Moteur EN Marche Plan DE TravailPlan DE Trabajo Antes DE Arrancar LA MáquinaStarting the Engine Using the ProductArranque DE LA Máquina Demarrage DU MoteurUtilisation DE LA Machine Empleo DEL ProductoIf Someone Comes MaintenanceManual Entretien SI QUELQU’UN S’APPROCHESI SE Acerca Alguien MantenimientoTransportation Handling FuelRefill after cooling the engine Transport Manipulation DU CarburantManejo DEL Combustible Llenar una vez que el motor se haya enfriadoRecommended Mixing Ratio Gasoline 50OIL When using RedMax/ZENOAH genuine oilFuel Lors de l’utilisation de la véritable huile RedMax/ZENOAH Rapport DE Melange Recommande Essence 50 HuileProporción DE LA Mezcla Recomendada Gasolina 50 Aceite Al utilizar el aceite auténtico de RedMax/ZENOAHFueling the Unit HOW to MIX FuelRemplissage DU Reservoir Abastecimiento DE LA Unidad Comment Obtenir UN BON MelangeComo Mezclar EL Combustible For Your Engine LIFE, Avoid Para Contribuir a LA Vida Útil DEL MOTOR, Evite Eviter Pour Prolonger LA Duree DE VIE DU MoteurOP3 7 6 OperationStarting Engine Cutting head will start moving upon the engine startsFonctionnement Uso Stopping Engine OP3 Adjusting Idling SpeedRunning in the Engine Air filterFonctionnement DU Moteur Arret DU MoteurReglage DU Ralenti Apagado DEL MotorHandle CHTZ2401/CHTZ2401-CA only HOW to USEDo not press the throttle during this operation Handle Locking leverCómo Usar Procedure Dutilisation Manette CHTZ2401/CHTZ2401-CAHorizontal cut Hedge Trimming TechniquesVertical cut Técnicas DE Recorte Coupe horizontaleCorte vertical Corte horizontalMaintenance Chart MaintenanceTabla DE Mantenimiento Tableau D’ENTRETIENAIR Filter Replacement Plug is NGK CMR7H or Champion RZ7CFuel Filter Spark PlugFiltre a Carburant Filtre a AIRBougie D’ALLUMAGE Filtro DE AireBlades Intake AIR Cooling VentLames Ouïe DE Refroidissement PAR AIRVentilación DE Refrigeración DEL Aire DE Admisión CuchillasReduction Gearbox Safety Lock MA7Sharpening MA8 Afilado MA8 Affûtage MA8Verrou DE Sécurité MA7 Dispositivo DE Seguridad MA7 Reducteur MA9Storage Procedures to be Performed After Every 100 Hours of USEDisposal ANTI-VIBRATION SystemAlmacenamiento Entretien MantenimientoRangement Guide de localisation des pannes Troubleshooting guide11. Guía de localización y solución de problemas Remarque NotaParts list Cutting Unit HTZ2401/HTZ2401-CA HTZ2401-L/HTZ2401-L-CA S/N Parts list CHTZ2401-L/CHTZ2401-L-CA Parts list Cylinder Comp Owner’s warranty responsibilities Manufacturer’s warranty coverageObligations du propriétaire liées à la garantie Couverture de la garantie constructeurResponsabilidades del propietario Cobertura de la garantía dada por el fabricanteLimited Warranty Garantie limitée Garantía Limitada Mesures DE Lutte Contre LES Emissions Emission ControlControl DE Emisiones CHTZ2401-CA/CHTZ2401L-CA

CHTZ2401L, CHTZ2401, HTZ2401, HTZ2401-CA, HTZ2401L specifications

The Zenoah CHTZ2401, CHTZ2401L, HTZ2401L, HTZ2401, and HTZ2401-CA are a series of high-performance two-stroke engines designed for a variety of applications, including outdoor power equipment, gardening tools, and professional-grade machinery. These engines are renowned for their reliability, power output, and advanced features.

One of the main features of the Zenoah CHTZ2401 series is its powerful engine capacity. With a displacement of 24 cc, these engines deliver impressive power while remaining lightweight, making them suitable for handheld equipment. The CHTZ2401 and its variations provide a balance between performance and fuel efficiency, allowing users to work longer without frequently refueling.

A standout characteristic is the incorporation of Zenoah's advanced engine technologies. The engines are designed with a high compression ratio, which enhances combustion efficiency. This results in improved torque and power delivery, ensuring that the equipment can handle demanding tasks with ease. Additionally, the engines feature a unique exhaust system that minimizes emissions while maximizing power output, aligning with modern environmental standards.

The CHTZ2401 series also includes enhanced cooling systems, ensuring that the engines maintain optimal operating temperatures even during prolonged use. This feature is crucial in preventing overheating and extending the lifespan of the equipment. The lightweight design of these engines, often constructed with durable yet lightweight materials, contributes to the overall functionality and ease of use, especially for handheld applications.

Another important aspect is maintenance. The Zenoah engines are designed for easy access to components that require regular servicing, such as air filters and spark plugs. This user-friendly design lowers downtime and makes maintenance more convenient for users, whether they are professionals or casual gardeners.

In summary, the Zenoah CHTZ2401, CHTZ2401L, HTZ2401L, HTZ2401, and HTZ2401-CA engines represent cutting-edge technology in the realm of two-stroke engines. With their powerful performance, improved efficiency, and easy maintenance features, they are suitable for a wide range of applications, from landscaping to construction. As a result, they have become a popular choice among professionals who demand reliability and performance from their outdoor power equipment.
Top Page Image Contents