Zenoah HTZ2401-CA, CHTZ2401L manual Symbols on the machine

Page 6

 

English

 

 

 

3. Warning labels on the machine

 

 

 

 

 

(1) Read owner's manual before operating this

 

machine.

(1)

(2) Wear head, eye and ear protection.

 

(3) Handling this machine improperly could result

 

in accidents causing serious injury or death.

 

Read this manual carefully and practice using

 

the hedge-trimmer until you are fully acquainted

(2)

with all operations and have learned to use it

correctly.

 

(4) This is extremely sharp and can easily cause

 

cuts.

 

 

 

(3)

IMPORTANT

 

 

 

 

If warning label peel off or become soiled and

 

 

impossible to read, you should contact the dealer from

 

which you purchased the product to order new labels

 

and affix them in the required location(s).

(4)

WARNING

Never modify your machine.

We won’t warrant the machine, if you use the remodeled hedge-trimmer or you don’t observe the proper usage written in the manual.

4. Symbols on the machine

For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to take a mistake.

(a)The port to refuel the "MIX GASOLINE"

Position:

FUEL TANK CAP

(b)The direction to close the choke

Position:

AIR CLEANER COVER

(c)The direction to open the choke

Position:

AIR CLEANER COVER

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOI Tables des matieres ContenidoAdvertencias Contenidas EN EL Manual Specifications Parts locationModel Especificaciohes Emplacement des pieces Situación de las piezasFiche technique ModeloSymbols on the machine Emplacement PosiciónFor safe operation Working ConditionWorking Circumstance Conditions DE Travail Condición DE TrabajoCircunstancias DE Trabajo Working Plan Before Starting the EnginePlan DE Trabajo Plan DE TravailAvant DE Mettre LE Moteur EN Marche Antes DE Arrancar LA MáquinaUsing the Product Starting the EngineUtilisation DE LA Machine Demarrage DU MoteurArranque DE LA Máquina Empleo DEL ProductoMaintenance ManualIf Someone Comes SI SE Acerca Alguien SI QUELQU’UN S’APPROCHEEntretien MantenimientoHandling Fuel Refill after cooling the engineTransportation Manejo DEL Combustible Manipulation DU CarburantTransport Llenar una vez que el motor se haya enfriadoWhen using RedMax/ZENOAH genuine oil FuelRecommended Mixing Ratio Gasoline 50OIL Proporción DE LA Mezcla Recomendada Gasolina 50 Aceite Rapport DE Melange Recommande Essence 50 HuileLors de l’utilisation de la véritable huile RedMax/ZENOAH Al utilizar el aceite auténtico de RedMax/ZENOAHHOW to MIX Fuel Fueling the UnitComment Obtenir UN BON Melange Como Mezclar EL CombustibleRemplissage DU Reservoir Abastecimiento DE LA Unidad For Your Engine LIFE, Avoid Eviter Pour Prolonger LA Duree DE VIE DU Moteur Para Contribuir a LA Vida Útil DEL MOTOR, EviteStarting Engine OperationOP3 7 6 Cutting head will start moving upon the engine startsFonctionnement Uso Running in the Engine Adjusting Idling SpeedStopping Engine OP3 Air filterReglage DU Ralenti Arret DU MoteurFonctionnement DU Moteur Apagado DEL MotorDo not press the throttle during this operation HOW to USEHandle CHTZ2401/CHTZ2401-CA only Handle Locking leverProcedure Dutilisation Manette CHTZ2401/CHTZ2401-CA Cómo UsarHedge Trimming Techniques Vertical cutHorizontal cut Corte vertical Coupe horizontaleTécnicas DE Recorte Corte horizontalMaintenance Maintenance ChartTableau D’ENTRETIEN Tabla DE MantenimientoFuel Filter Replacement Plug is NGK CMR7H or Champion RZ7CAIR Filter Spark PlugBougie D’ALLUMAGE Filtre a AIRFiltre a Carburant Filtro DE AireIntake AIR Cooling Vent BladesVentilación DE Refrigeración DEL Aire DE Admisión Ouïe DE Refroidissement PAR AIRLames CuchillasSafety Lock MA7 Sharpening MA8Reduction Gearbox Verrou DE Sécurité MA7 Dispositivo DE Seguridad MA7 Affûtage MA8Afilado MA8 Reducteur MA9Disposal Procedures to be Performed After Every 100 Hours of USEStorage ANTI-VIBRATION SystemEntretien Mantenimiento RangementAlmacenamiento Troubleshooting guide 11. Guía de localización y solución de problemasGuide de localisation des pannes Nota RemarqueParts list Cutting Unit HTZ2401/HTZ2401-CA HTZ2401-L/HTZ2401-L-CA S/N Parts list CHTZ2401-L/CHTZ2401-L-CA Parts list Cylinder Comp Manufacturer’s warranty coverage Owner’s warranty responsibilitiesCouverture de la garantie constructeur Obligations du propriétaire liées à la garantieCobertura de la garantía dada por el fabricante Responsabilidades del propietarioLimited Warranty Garantie limitée Garantía Limitada Control DE Emisiones Emission ControlMesures DE Lutte Contre LES Emissions CHTZ2401-CA/CHTZ2401L-CA

CHTZ2401L, CHTZ2401, HTZ2401, HTZ2401-CA, HTZ2401L specifications

The Zenoah CHTZ2401, CHTZ2401L, HTZ2401L, HTZ2401, and HTZ2401-CA are a series of high-performance two-stroke engines designed for a variety of applications, including outdoor power equipment, gardening tools, and professional-grade machinery. These engines are renowned for their reliability, power output, and advanced features.

One of the main features of the Zenoah CHTZ2401 series is its powerful engine capacity. With a displacement of 24 cc, these engines deliver impressive power while remaining lightweight, making them suitable for handheld equipment. The CHTZ2401 and its variations provide a balance between performance and fuel efficiency, allowing users to work longer without frequently refueling.

A standout characteristic is the incorporation of Zenoah's advanced engine technologies. The engines are designed with a high compression ratio, which enhances combustion efficiency. This results in improved torque and power delivery, ensuring that the equipment can handle demanding tasks with ease. Additionally, the engines feature a unique exhaust system that minimizes emissions while maximizing power output, aligning with modern environmental standards.

The CHTZ2401 series also includes enhanced cooling systems, ensuring that the engines maintain optimal operating temperatures even during prolonged use. This feature is crucial in preventing overheating and extending the lifespan of the equipment. The lightweight design of these engines, often constructed with durable yet lightweight materials, contributes to the overall functionality and ease of use, especially for handheld applications.

Another important aspect is maintenance. The Zenoah engines are designed for easy access to components that require regular servicing, such as air filters and spark plugs. This user-friendly design lowers downtime and makes maintenance more convenient for users, whether they are professionals or casual gardeners.

In summary, the Zenoah CHTZ2401, CHTZ2401L, HTZ2401L, HTZ2401, and HTZ2401-CA engines represent cutting-edge technology in the realm of two-stroke engines. With their powerful performance, improved efficiency, and easy maintenance features, they are suitable for a wide range of applications, from landscaping to construction. As a result, they have become a popular choice among professionals who demand reliability and performance from their outdoor power equipment.
Top Page Image Contents