Operator's Manual | Second Edition • Third Printing |
|
|
|
|
Pre-operation Inspection
RBe sure that the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.
RBe sure that all decals are legible and in place. See Decals section.
RCheck for engine oil leaks and proper oil level. Add oil if needed. See Maintenance section.
RCheck for hydraulic oil leaks and proper oil level. Add oil if needed. See Maintenance section.
RCheck for engine coolant leaks and proper level of coolant. Add coolant if needed. See Maintenance section.
RCheck for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications:
RElectrical components, wiring and electrical cables
RHydraulic hoses, fittings, cylinders and manifolds
RFuel and hydraulic tanks
RDrive motors
RWear pads
RTires and wheels
REngine and related components
RLimit switches, alarms and horn
RNuts, bolts and other fasteners
RPlatform entry gate
RBeacon and alarms (if equipped)
RSafety arm
RPlatform overload components
RPlatform extension(s)
RScissor pins and retaining fasteners
RPlatform control joystick
RGenerator (if equipped)
ROutrigger housings and footpads (if equipped) Check entire machine for:
RCracks in welds or structural components
RDents or damage to machine
RBe sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened
RSide rails are installed and rail pins and bolts are fastened
12 | Genie | Part No.82828 |