Second Edition • Third Printing | Operator's Manual |
|
|
|
|
Observe and Obey:
Only qualified riggers should rig and lift the machine.
Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight. See the serial label for the machine weight.
Lifting Instructions
Fully lower the platform. Be sure the extension decks, controls and covers are secure. Remove all loose items on the machine.
Determine the center of gravity of your machine using the table and the picture on this page.
Attach the rigging only to the designated lifting points on the machine. There are two lifting points on each end of the machine.
Adjust the rigging to prevent damage to the machine and to keep the machine level.
TRANSPORT AND LIFTING INSTRUCTIONS
Center of gravity | X Axis | Y Axis |
|
|
|
1.8 m | 97.0 cm | |
without outriggers |
|
|
|
|
|
1.9 m | 94.5 cm | |
with outriggers |
|
|
|
|
|
1.8 m | 97.0 cm | |
without outriggers |
|
|
|
|
|
1.9 m | 94.5 cm | |
with outriggers |
|
|
|
|
|
1.8 m | 1.0 m | |
without outriggers |
|
|
|
|
|
1.9 m | 1.0 m | |
with outriggers |
|
|
|
|
|
1.9 m | 1.0 m | |
|
|
|
X Axis
Y Axis
Part No.82828 | Genie | 27 |