Operator's Manual | Second Edition • Third Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Operation From Ground with Controller
Maintain safe distances between operator, machine and fixed objects.
Be aware of the direction the machine will travel when using the controller.
Outrigger Operation (if equipped)
1Position the machine below the desired work area.
Note: The engine must be running for the outriggers to operate.
2 Push and hold the auto level button.
3Activate the up/down rocker switch in the down direction. The outriggers will extend and level the machine. A beep will sound when the machine is level.
The indicator light on the lift function enable button will turn red when one but not all outriggers are down. All drive and lift functions are disabled.
The light turns green on the lift function enable button and on the individual outrigger buttons when all the outriggers are in firm contact with the ground.
The drive function is disabled while the outriggers are down.
To control individual outriggers
1Push and hold one or more outrigger buttons.
2Activate the outrigger up/down rocker switch in the desired direction to level the machine.
Fall Protection
Personal fall protection equipment (PFPE) is not required when operating this machine. If PFPE is required by job site or employer rules, the following shall apply:
All PFPE must comply with applicable governmental regulations and must be inspected and used in accordance with the manufacturer’s instructions.
After Each Use
1Select a safe parking
2Lower the platform.
3Turn the key switch to the off position and remove the key to secure from unauthorized use.
4Chock the wheels.
24 | Genie | Part No.82828 |