Genie GS-3390, GS-5390, GS-3384 manual Maximum capacity GS-4390 Maximum occupants

Page 5

Second Edition • Third Printing

Operator's Manual

 

 

 

 

Maximum capacity - GS-4390

Maximum occupants

7

 

 

Height of Platform

Maximum Capacity

 

 

13.1 m

680 kg

 

 

10.6 m

984 kg

 

 

8 m

1286 kg

 

 

5.4 m

984 kg

 

 

2.9 m

680 kg

 

 

 

 

Maximum capacity - GS-4390

 

with extra capacity option

 

 

 

Maximum occupants

7

 

 

Height of Platform

Maximum Capacity

 

 

13.1 m

816 kg

 

 

10.6 m

1118 kg

 

 

8 m

1421 kg

 

 

5.4 m

1118 kg

 

 

2.9 m

816 kg

 

 

Maximum capacity - GS-5390

 

 

 

Maximum occupants

4

 

 

Height of Platform

Maximum Capacity

 

 

16.2 m

680 kg

 

 

12.8 m

1046 kg

 

 

9.4 m

1410 kg

 

 

5.9 m

1046 kg

 

 

2.5 m

680 kg

 

 

SAFETY RULES

Do not alter or disable the limit switches.

Do not drive over 1.1 km/h with the platform raised.

Do not use the platform controls to free a platform that is caught, snagged or otherwise prevented from normal motion by an adjacent structure. All personnel must be removed from the platform before attempting to free the platform using the ground controls.

Do not raise the platform unless the machine is on a firm, level surface.

Do not depend on the tilt alarm as a level indicator. The tilt alarm sounds on the chassis and in the platform when the machine is on a slope.

If the tilt alarm sounds:

Lower the platform. Move the machine to a firm, level surface. If the tilt alarm sounds when the platform is raised, use extreme caution to lower the platform.

Part No.82828

Genie GS-3384 & GS-3390 & GS-4390 & GS-5390

3

Image 5
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesMachines with capacity indicator Machines without capacity indicatorElectrocution Hazards Tip-over HazardsMaximum capacity GS-4390 Maximum occupants Maximum allowable manual force Fall Hazards Collision Hazards Explosion and Fire Hazards Component Damage HazardsDamaged Machine Hazards Crushing HazardsBattery Safety Burn Hazards Outrigger Safety Tip-over HazardsExplosion Hazard Electrocution HazardPage Ground Control Panel ControlsPlatform Controls Fundamentals Pre-operation InspectionPre-operation Inspection Maintenance Symbols Legend MaintenanceObserve and Obey Check the BatteriesCheck the Engine Oil Level Check the Hydraulic Oil Level Check the Engine Coolant Level Scheduled MaintenanceTest Emergency Stop Function TestsAt the Ground Controls At the Platform Controls Test Up/Down Functions and Function EnableTest the Auxiliary Lowering Test the HornTest Limited Drive Speed Test the SteeringTest Drive and Braking Test Auxiliary Lowering Test the Up Limit Switch and the Outriggers GS-5390Test the Tilt Sensor Operation Workplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsStarting the Engine Emergency StopOperation From Ground Operation From PlatformAuxiliary Lowering To Extend and Retract PlatformOutrigger Operation if equipped Operation From Ground with ControllerFall Protection After Each UseTransport and Lifting Instructions Free-wheel Configuration for WinchingSecuring to Truck or Trailer for Transit Axis Lifting InstructionsDecal Inspection DecalsEngine Side Ground Controls Floor Loading Information SpecificationsSpecifications Stowed, maximum Km/h Platform raised, maximum 12.2 m/39 sec GS-5390 Distributed by