Genie GS-5390, GS-3390, GS-4390, GS-3384 manual Contents, Contact us

Page 2

Operator's Manual	Second Edition • Third Printing

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, please call Genie Industries.

Contents
	Page
Safety	1
Legend	8
Controls	9
Pre-operation Inspection	11
Maintenance	13
Function Tests	16
Workplace Inspection	20
Operating Instructions	21
Transport and Lifting Instructions	25
Decals	28
Specifications	30
Contact us:
Internet: http://www.genielift.com
e-mail: techpub@genieind.com

Copyright © 2002 by Genie Industries

First Edition: First Printing, January 2002

Second Edition: Third Printing, March 2008

"Genie" is a registered trademark of

Genie Industries in the U.S.A. and many other countries. "GS" is a trademark of Genie Industries.

Printed on recycled paper

Printed in U.S.A.

Genie GS-3384 and GS-3390 and GS-4390 and GS-5390

Part No.82828

Image 2

Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Machines without capacity indicatorMachines with capacity indicator Tip-over HazardsMaximum capacity GS-4390 Maximum occupants Maximum allowable manual force Fall Hazards Collision Hazards Damaged Machine Hazards Component Damage HazardsExplosion and Fire Hazards Crushing HazardsExplosion Hazard Outrigger Safety Tip-over HazardsBattery Safety Burn Hazards Electrocution HazardPage Controls Ground Control PanelPlatform Controls Pre-operation Inspection FundamentalsPre-operation Inspection Observe and Obey MaintenanceMaintenance Symbols Legend Check the BatteriesCheck the Engine Oil Level Scheduled Maintenance Check the Hydraulic Oil Level Check the Engine Coolant LevelTest Emergency Stop Function TestsAt the Ground Controls Test the Auxiliary Lowering Test Up/Down Functions and Function EnableAt the Platform Controls Test the HornTest Limited Drive Speed Test the SteeringTest Drive and Braking Test Auxiliary Lowering Test the Up Limit Switch and the Outriggers GS-5390Test the Tilt Sensor Operation Workplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedOperation From Ground Emergency StopStarting the Engine Operation From PlatformTo Extend and Retract Platform Auxiliary LoweringFall Protection Operation From Ground with ControllerOutrigger Operation if equipped After Each UseFree-wheel Configuration for Winching Transport and Lifting InstructionsSecuring to Truck or Trailer for Transit Lifting Instructions AxisDecals Decal InspectionEngine Side Ground Controls Specifications Floor Loading InformationSpecifications Stowed, maximum Km/h Platform raised, maximum 12.2 m/39 sec GS-5390 Distributed by