Generac 004451, 004582 Cord Sets and Connection Plugs, 1 AC, 20 AMP, Duplex Receptacle

Page 9

Section 2 – Operation

Commercial-Industrial-Residential Portable Generator System

2.2CORD SETS AND CONNECTION PLUGS

2.2.1 AC, 20 AMP, DUPLEX RECEPTACLE

This is a 120 Volt outlet protected against overload by a 20 Amp push-to- reset circuit breaker. Use each socket to power 120 Volt AC, single phase, 60 Hz electrical loads requiring up to a combined 2400 watts (2.4 kW) or 20 Amps of current. Use only high quality, well-insulated, 3-wire grounded cord sets rated for 125 Volts at 20 Amps (or greater).

Keep extension cords as short as possible, preferably less than 15 feet long, to prevent voltage drop and possible overheating of wires.

Figure 7 - 120 Volt AC, 20 Amp, Duplex Receptacle

2.2.2 120V AC, 20 AMP, GFCI RECEPTACLE

This unit is equipped with a ground fault circuit interrupter (GFCI). This device meets applicable federal, state and local codes.

Figure 8 - 120 VAC, 20 Amp GFCI Receptacle

Testing the GFCI: Test the GFCI outlet every month as follows:

Plug a test lamp into the receptacle.

Start the generator, the test lamp should be on.

Press the “Test” button located on the front of the receptacle to trip the device.

This should stop the flow of electricity making the lamp shut off. The yellow trip indicator should now be on.

To restore the flow of electricity, press the “Reset” button on the front of the receptacle. If the GFCI does not perform in this manner, do not use the receptacle. Contact a local service dealer.

This outlet is protected against overload by a 20A push-to-reset circuit breaker. Use the outlet to power 120V AC, single-phase, 60 Hz, electrical loads requiring up to a combined 2400 watts (2.4 kW) or 20 amps of current.

A GFCI receptacle is different from conventional receptacles. In the event of a ground fault, a GFCI will trip and quickly stop the flow of electricity to prevent serious injury.

Definition: Instead of following its normal safe path, electricity passes through a persons body to reach the ground. For example, a defective appliance can cause a ground fault.

A GFCI receptacle does NOT protect against circuit overloads, short circuits, or shocks. For example, electric shock can still occur if a person touches charged electrical wires while standing on a non-conducting surface, such as a wood floor.

2.2.3 120V AC, 30 AMP RECEPTACLE

Use a NEMA L5-30 plug with this receptacle. Connect a 3-wire cord set rated for 125 Volts AC at 30 Amps (or greater) to the plug.

Figure 9 - 120 VAC, 30 Amp Receptacle

7

Image 9
Contents Ultra Source Safety Rules General Information Introduction General Hazards Important Safety InstructionsElectrical Hazards Explosion HazardsFire Hazards Accessory BOX AssemblyUnpacking Assembling the Wheel KITHandle Assembly Battery ConnectionKnow the Generator Volt AC, 30 Amp Locking Receptacle SuppliesWinter / Summer Valve See Cold Weather Operation Cord Sets and Connection Plugs 1 AC, 20 AMP, Duplex Receptacle2 120V AC, 20 AMP, Gfci Receptacle 5 12 Volt DC, 10 AMP Receptacle 120V 30AConnecting Electrical Loads HOW to USE the GeneratorDON’T Overload the Generator Grounding the GeneratorBefore Starting the Generator Wattage Reference GuideAdding Engine OIL DeviceAdding Gasoline To Start the EngineCold Weather OPERATION/ DE-ICER Automatic Idle ControlLOW OIL Pressure Shutdown System Stopping the EngineTo recharge 12 Volt batteries, proceed as follows Charging a BatteryProduct Specifications Maintenance ScheduleGenerator Specifications Engine SpecificationsGeneral Recommendations Clean Spark Arrestor Screen Service AIR CleanerTo adjust valve clearance Adjusting Valve ClearanceStorage General Long Term StorageOther Storage Tips Problem Cause Solution TroubleshootingCommercial-Industrial-Residential Portable Generator System Commercial-Industrial-Residential Portable Generator System Bearing Stator Closest Wiring Diagram Drawing No E0228Schematic Drawing No E0229 GT-990 & GT-760 Engine Page 1 Drawing No E0034 46 45 43 42QTY Description GT-990 & GT-760 Engine Page 2 Drawing No E0034 DetailaPart NO. QTY Description Generator Drawing No D4488 QTY. Description Exploded Residential No E0227 Control Panel Drawing No E0227 Part NO. QTY. DescriptionFrame, Handle & Wheel Kit Drawing No E0695 DetailRubber Tank Mount BOX 297 WHITEWATER, WI California Emission Control Warranty StatementEmission Control System Warranty Warranty Schedule Part No E0226 06/01/02

004451, 004582, 004451 ,004582 specifications

Generac is a leading manufacturer of power generation equipment, known for its robust and reliable systems. Among its vast lineup, the Generac 004451 and 004582 portable generators stand out due to their impressive features, advanced technologies, and user-friendly characteristics, making them suitable for various applications such as home backup, outdoor activities, and job sites.

The Generac 004451 model boasts a powerful 2,500-watt output, making it ideal for powering essential appliances during outages or for use in recreational settings. Its compact design enhances portability, allowing users to easily transport it wherever needed. This generator features a durable frame designed to withstand rugged environments, including a fold-down handle for convenient storage. It is equipped with a reliable 50-state compliant engine, ensuring that it meets stringent environmental regulations while delivering dependable power.

On the other hand, the Generac 004582 model is designed for users needing a bit more power, featuring a 3,200-watt maximum output. Like the 004451, it emphasizes portability and ease of use, but it also incorporates a more advanced inverter technology. This innovation ensures that the generator produces clean, stable power, making it safe for sensitive electronics like smartphones, laptops, and medical devices. The 004582's lightweight construction allows for effortless transport, while its fold-down handle and never-flat wheels enhance mobility.

Both models are engineered with user-friendly controls and features such as easy-to-read fuel gauges and a low-oil shutdown system, which prevents engine damage by automatically shutting down the generator when the oil level is too low. Additionally, these generators include multiple AC outlets, offering versatility in powering various devices simultaneously.

Safety is paramount in Generac's design philosophy, as evident in the inclusion of features such as circuit breakers to prevent overloads. Additionally, they are equipped with a robust cooling system that allows for prolonged operation without overheating.

Overall, the Generac 004451 and 004582 portable generators provide a perfect blend of power, portability, and technological advancements, making them suitable for emergency backup power, outdoor events, and job site requirements. With a strong emphasis on reliability and user convenience, Generac continues to be a trusted name in the field of power generation.