White Outdoor 769-04211 warranty Maintaining Your Snow Thrower, Engine, Lubrication, Augers

Page 14

6

Maintaining

Your Snow

Thrower

WARNING

Before lubricating, repairing, or inspect- ing, disengage all controls and stop engine. Wait until all moving parts have come to a complete stop.

Keep all grease and oil off of the rubber friction wheel and aluminum drive plate.

Engine

Refer to the separate engine manual packed with your unit for all engine maintenance.

Lubrication

Engine

Refer to the separate engine manual packed with your unit for all engine lubrication instructions.

Gear Shaft

The gear (hex) shaft should be lubricated at least once a season or after every 25 hours of operation.

WARNING: Run the engine com- pletely dry of gasoline before tipping snowthrower.

1.Carefully pivot the snow thrower up and forward so that it rests on the auger housing.

2.Remove the lower frame cover by removing the screws which secure it.

3.Apply a light coating of an all-weather multi-purpose oil to the hex shaft. See Figure 6-1.

NOTE: Avoid getting oil on rubber friction wheel and aluminum drive plate.

Wheels

At least once a season, remove both wheels. Clean and coat the axles with a multipurpose automotive grease before reinstalling wheels.

Auger Shaft

At least once a season, remove the shear pins on auger shaft. Spray lubricant inside shaft, around the spacers. Also lubricate the flange bearings found at either end of the shaft. See Figure 6-2.

Augers

•The augers are secured to the spiral shaft with shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins may shear. Refer to Figure 6-2.

•If the augers will not turn, check to see if the pins have sheared. One set of replacement shear pins has been provided with the snow thrower. When replacing pins, spray an oil lubricant into shaft before inserting new pins.

Shave Plate and Skid Shoes

The shave plate and skid shoes on the bottom of the snow thrower are subject to wear. They should be checked periodically and replaced when necessary. To remove skid shoes:

1.Remove the four carriage bolts and hex flange nuts which secure them to the snow thrower.

2.Reassemble new skid shoes with the four carriage bolts (two on each side) and hex flange nuts. Refer to Figure 6-3.

 

Figure 6-1

 

3HEARE0IN

3PACERS

"EARING

 

 

 

Figure 6-2

 

Figure 6-3

To remove shave plate:

1.Remove the carriage bolts and hex nuts which attach it and the skid shoes to the snow thrower housing.

2.Reassemble new shave plate, making sure heads of carriage bolts are to the inside of housing. Tighten securely.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 07/09/08 Two-Stage Snow Thrower769-04211 Customer Support Table of ContentsFinding and Recording Model Number Do not use the engine’s electric starter in the rain Safety SymbolsThere are rotating blades inside Your Responsibility Restrict the usePreparation Safe Operation PracticesTraining Your ResponsibilityDo not modify engine Maintenance & StorageOperation Average Useful LifeSetting Up Your Snow Thrower Shear Pin Storage optional Clean-Out ToolLamp Wiring Harness If equipped Drift Cutters If EquippedOperating Your Snow Thrower Know Your Snow Thrower$26% #/.42 Stopping the Engine Gas & Oil Fill-UpStarting the Engine Engines with Starter Handle non-electric startAuger Control Test To Engage DriveTo Engage Augers Chute Control Making AdjustmentsShift Cable Drive Control & Shift LeverTo adjust the skid shoes You can also check the adjustment as followsSpace between the skid shoes and the ground can be adjusted To adjust the auger control, refer toLubrication Maintaining Your Snow ThrowerEngine AugersUnhook the support bracket spring from the frame Auger Belt ReplacementRoll the auger belt off the engine pulley. See Figure Remove and replace belt in the reverse order Drive Belt ReplacementFriction Wheel Inspection To inspect the friction wheel, proceed as followsTrouble Shooting Problem Cause RemedyWarranty 05.28.08Auger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Optional/en option 42CPart RÉF Pièce Description 30 in/po Remarque Lhabitacle peut être légèrement différent 5952Part Description RÉF Pièce 31AE6GKF500 Adressez-vous au «Service après-vente» Parts List Pièces DétachéesFor parts and/or accessories refer to customer support on La page 2 pour ce qui concerne les pièces et/ou accessoiresManual Chute Control Way Chute Control with tall chutePart RÉF Pièce Description Page Page Com.mtdcanada GarantieSituation Client du disposition la à exclusif recoursSolution Causes Problème DépannageSouffleuse Remisage de InstructionsPropre Transmission de courroie la de Remplacement SouffleuseVis la REMARQUEréinstaller de PAS N’oubliez Tarière La de courroie la de RemplacementPatins et plate Lame TarièresRéglages Vitesses de levier Et transmission la de CommandeGoulotte la de Commande Vitesses de changement de CâbleMoteur du Arrêt Électrique Moteur du marche en Mise’huile et d’essence Pleins Faites NePhare Fonctions 4 à goulotte la de CommandeRoues des d’orientation Commande Goulotte la de dégagement de OutilExplosif sont peurs Va les et inflammable Souffleuse la de CommandesAmorçeur La sur consignesOption en cisaillement De goupille la de Remisage Phare du câblage de FaisceauPneus des Pression Échéant cas leCette Remarque Les RemarqueMoyenne utile vie de Durée Remisage et EntretienResponsabilité Votre Gaz de émissions les concernant AvisVotre PréparationFormation ’essence de ManipulationSécurité de Symboles Machine la d’utiliserModèle de numéro le trouver Pour Vente-après ServiceVente-après service au d’abord adresser vous sans Matières des TablePhases deux neige à Souffleuse 07/09/08 04211-769

769-04211 specifications

The White Outdoor 769-04211 is a noteworthy addition to the world of outdoor power equipment, designed for those who seek reliability and performance in their lawn care routine. This robust machine is primarily recognized as a walk-behind mower, showcasing features that cater to both homeowners and professional landscapers.

One of the standout characteristics of the 769-04211 is its powerful engine. Equipped with a high-performance motor, this mower ensures efficient cutting even in dense grass conditions. The engine delivers a reliable start and smooth operation, allowing users to tackle larger yards without the fear of stalling. The mower's cutting deck is designed to provide an optimal width, ensuring that users can cover more ground quickly while maintaining precision in their cuts.

The 769-04211 also boasts an adjustable cutting height feature, which allows users to customize the grass length to their preference. This feature is particularly beneficial for those who maintain different types of lawns, as it provides versatility to adapt to various grass species and seasonal growth patterns. With easily accessible height adjustment levers, transitioning between settings is straightforward, making the mowing process more efficient.

In terms of build quality, the White Outdoor 769-04211 emphasizes durability. Its chassis is constructed from robust materials designed to withstand the rigors of frequent use. This design consideration not only extends the life of the mower but also ensures consistent performance over time.

Another notable technology integrated into the 769-04211 is its mulching capability. This function allows grass clippings to be finely chopped and redistributed on the lawn, providing natural fertilization and promoting healthier growth. The option to switch between bagging and mulching adds to the mower's versatility, accommodating different user preferences and lawn conditions.

User comfort has not been overlooked in the design of the White Outdoor 769-04211. The mower features ergonomic handles that provide a secure grip, making it easier to maneuver around tight corners and obstacles. Additionally, its lightweight construction aids in reducing operator fatigue, ensuring that mowing does not become a strenuous task.

Overall, the White Outdoor 769-04211 stands out with its powerful engine, adjustable cutting height, durable construction, and user-friendly features. Whether for a small suburban yard or a larger landscape, this mower delivers reliability and efficiency, making it a valuable tool for anyone invested in maintaining their outdoor spaces.
Top Page Image Contents