Husqvarna 15530SB-LS manual Service Notes

Page 23

SERVICE NOTES

Image 23

Contents Operators Manual 15530SB-LSOperation Safe Operation Practices for Walk-Behind Snow ThrowersTraining PreparationPRODUCT SPECIFICATIONS TABLE OF CONTENTSMaintenance and Storage Clearing a Clogged Discharge ChuteREMOVE SNOW THROWER FROM CARTON ASSEMBLY / PRE-OPERATIONHOW TO SET UP YOUR SNOW THROWER PARTS PACKED SEPARATELY IN CARTONUNFOLD UPPER HANDLE INSTALL SPEED CONTROL ROD See Figs. 1 andINSTALL TRACTION DRIVE CONTROL ROD See Figs. 3 and INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD See Fig INSTALL AUGER CONTROL ROD See Figs. 5 andCHECK TIRE PRESSURE INSTALL CHUTE DEFLECTOR REMOTE CONTROL See Figs. 8 andKNOW YOUR SNOW THROWER OPERATIONRecoil auxiliary starter handle - used for starting the MEETS A.N.S.I. SAFETY REQUIREMENTSTraction drive control lever - used to engage power Drive speed control lever - used to select forward orTO USE THROTTLE CONTROL See Fig HOW TO USE YOUR SNOW THROWERSTOPPING TO USE FUEL SHUT-OFF VALVE See FigTO MOVE FORWARD AND BACKWARD See Fig USING THE CLEAN-OUT TOOL See FigPOWER STEERING OPERATION See Fig TO THROW SNOW See FigTO USE DRIFT CUTTERS See Fig BEFORE STARTING THE ENGINETO ADJUST SKID PLATES See Fig SCRAPER BAR See FigIF RECOIL STARTER HAS FROZEN SNOW THROWING TIPSTO START ENGINE BEFORE STOPPINGLUBRICATION MAINTENANCEGENERAL RECOMMENDATIONS BEFORE EACH USEAUGER GEAR CASE CLEANINGENGINE BELTSCHUTE DEFLECTOR SERVICE AND ADJUSTMENTS1. Be sure throttle is in STOP position 2. Remove safety ignition key TO ADJUST SNOW THROWER HEIGHTTO REPLACE BELTS See Fig ENGINE SPEED TO ADJUST CABLE TENSION See FigTO REMOVE WHEELS See Fig CARBURETORENGINE OIL STORAGEOTHER FUEL SYSTEMEngine idles or TROUBLESHOOTINGLoss of power Does not startSERVICE NOTES SERVICE NOTES SERVICE NOTES SECTION 3 ITEMS NOT COVERED BY THIS WARRANTY WARRANTY STATEMENTSECTION 1 LIMITED WARRANTY SECTION 2 HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY