Ariens 932045 - ST8524E Operation, Primer Bulb, Attachment Clutch Right Hand Lever Speed Selector

Page 11

OPERATION

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

WARNING: To avoid injury to hands and feet, always disengage clutches, shut off engine, and wait for all movement to stop before unclogging or working on snow thrower.

Keep hands and feet away from auger and impeller.

CONTROLS AND FEATURES

See Figure 7 or Figure 8 for all Controls and Features locations.

Traction Drive Clutch - Left Hand Lever

Ignition Switch (Push/Pull Safety Key)

932046, 047, 048

932045

2

2

1 1

Key Switch has two positions:

2

1

OL2701

Squeeze the Traction Drive Clutch Lever against the Handlebar (1) to engage wheel drive for propelling unit. Forward speed will vary according to snow depth and moisture content.

Release lever (2) to stop movement.

1.“Stop” - pulled out

2."Run" - pushed in

NOTE: DO NOT twist key after it is inserted.

Primer Bulb

Pushing the primer bulb in adds fuel for easier engine start. Refer to Starting and Shut Off on page 14.

NOTE: When traveling to or from the

area to be cleared, press down on the handlebars enough to raise the front of the unit slightly off the surface. Engage the traction drive clutch without engaging the attachment drive clutch.

Attachment Clutch - Right Hand Lever

Speed Selector

Position the Speed Selector in the appropriate speed notch to control forward and reverse travel.

2

Squeeze Attachment Clutch Lever against handlebar (1) to engage attachment. Release both clutch levers (2) to disengage power and apply brake to attachment.

6

5

4

3

1

2

2 1

 

 

 

 

 

 

OS2401

1

IMPORTANT: If the belt squeals

 

when the attachment clutch lever is

OL2691

engaged, the impeller may be frozen

 

in the auger housing. Immediately

release the attachment clutch lever and move the unit into a heated area to thaw.

NOTE: If belt squeals when impeller turns freely, see Attachment Drive Belt Replacement on page 19.

Forward:

(6) Fastest

(1) Slowest

Reverse:

(1) Slow

(2) Fast

IMPORTANT: DO NOT change motion from forward to reverse with clutch engaged. Forward speed can be changed without declutching.

GB - 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Sno-Thro Introduction Table of ContentsPersonal Safety Is Involved Become Alert Obey The Message SafetySafety Decals and Locations Clogs or servicing Safety RulesPage Page Assembly AssemblyPackage Contents Check Engine Crankcase Oil Install Discharge Chute CrankCheck Tire Pressure Check Auger Gearcase Oil932046, 047 Controls and Features932045 Attachment Clutch Right Hand Lever Speed Selector OperationPrimer Bulb Throttle 932046, 047 Engine Shut-Off SwitchSnow Clean-Out Tool Figure Choke Control Knob 932046, 047 932045Filling Fuel Tank Starting and Shut OFF PRE-STARTTo Stop in AN Emergency Shut Off Snow RemovalTraveling TransportMaintenance General Lubrication Change Engine OILCheck Tire Pressure Check Auger GearcaseShear Bolts Service and AdjustmentsScraper Blade RunnersRemove Attachment Drive Belt Speed Selector AdjustmentAttachment Drive Belt Replacement Replace Attachment Drive Belt Brake Adjustment belowAttachment CLUTCH/BRAKE Traction Drive Belt ReplacementAdjustment Attachment Clutch Lever In. 7 15,2 cm 17,8 cm Remove Friction Disc Traction Drive Clutch AdjustmentFriction Disc Replacement Replace Friction Disc Reinstall Friction DiscStorage Service PartsAccessories Selector Adjustment on TroubleshootingEngine SpecificationsAriens Limited Warranties Exceptions, Limitations, Exclusions

932045 - ST8524E, 932048 - ST5520, 932046 - ST724E, 932047 - ST5524E specifications

The Ariens brand has long been synonymous with quality and durability in outdoor power equipment, particularly in snow blowers. The models Ariens 932047 (ST5524E), 932046 (ST724E), 932048 (ST5520), and 932045 (ST8524E) each deliver exceptional performance designed to handle a variety of winter conditions.

The Ariens 932047 - ST5524E is particularly well-regarded for its efficient 24-inch clearing width, making it ideal for residential driveways and sidewalks. With a powerful 223cc engine, this model provides ample power to tackle heavy, wet snow. It features a 200-degree chute rotation, which allows for precise snow throwing, enabling users to direct snow exactly where it is needed. The easy-to-use controls make operation simple, even in the harshest weather.

Similarly, the 932046 - ST724E offers a wider clearing width of 24 inches as well, paired with a robust 254cc engine. This model excels in heavy snow conditions, thanks to its deep-set auger design that effortlessly breaks down tough snow layers. The adjustable skid shoes enhance stability and control, while the electric start feature provides convenient starting, even in the coldest temperatures.

The Ariens 932048 - ST5520 is a slightly more compact option, maintaining a 20-inch clearing width and featuring a reliable 223cc engine. This snow blower is perfect for those with tighter spaces to clear, like alleys or smaller driveways. Its lightweight construction makes it easy to maneuver, while still providing the power needed for effective snow removal. The intuitive controls and multiple speed settings provide flexibility for the user.

Lastly, the 932045 - ST8524E stands out with its impressive 28-inch clearing width, making quick work of large areas. The 306cc engine is among the most powerful in the lineup, allowing it to handle even the toughest snowfalls with ease. This model incorporates advanced features like an automatically adjustable auger and impeller, maximizing performance in various snow conditions.

All four models incorporate Ariens’ signature build quality, ensuring long-lasting performance and reliability. With features like reinforced steel construction, adjustable skid shoes, and user-friendly designs, these snow blowers are perfect for tackling winter’s toughest challenges.
Top Page Image Contents