Ariens 932047 - ST5524E Install Discharge Chute Crank, Check Tire Pressure, Fill Engine Fuel Tank

Page 8

Install Discharge Chute Crank

1.If necessary, position the crank support bracket as shown in Figure 6.

2.Slide chute crank through crank support bracket.

3.Connect the chute crank to the pinion gear on chute with spring clip.

4.Align the chute crank and chute crank support bracket with the pinion gear so crank rotates freely.

5.Tighten the crank support bracket to the lower handlebar as shown in Figure 6.

2 in. (5.08 cm)

1

2

3

4

1.Chute Crank

2.Crank Support Bracket

3.Pinion Gear

4. Spring Clip

OS7065

OS0001

 

Figure 6

Check Tire Pressure

Check tire pressure and adjust to the pressure listed on tire sidewall.

Check Auger Gearcase Oil

Check oil level in auger gearcase (see Check Auger Gearcase on page 17).

Check Engine Crankcase Oil

IMPORTANT: The engine is shipped with 5W-30 oil in crankcase. Refer to Engine Manual for detailed instructions.

Fill Engine Fuel Tank

Refer to Engine Manual for proper fuel type and tank capacity.

Check Function of all Controls

Ensure unit runs and performs properly. Refer to Operation.

Run-in Attachment Belt

1.Start unit in a well-ventilated area according to Starting and Shut Off on page 14.

2.Engage attachment clutch lever and run attachment for about 15 minutes.

3.Stop unit, wait for all moving parts to stop, and remove spark plug wire.

4.Adjust belt finger, if necessary. See Attachment Drive Belt Replacement on page 19.

5.Adjust clutch according to Attachment Clutch/Brake Adjustment on page 21.

GB - 8

Image 8
Contents Sno-Thro Table of Contents IntroductionPersonal Safety Is Involved Become Alert Obey The Message SafetySafety Decals and Locations Safety Rules Clogs or servicingPage Page Assembly AssemblyPackage Contents Install Discharge Chute Crank Check Tire PressureCheck Auger Gearcase Oil Check Engine Crankcase OilControls and Features 932046, 047932045 Attachment Clutch Right Hand Lever Speed Selector OperationPrimer Bulb Engine Shut-Off Switch Snow Clean-Out Tool FigureChoke Control Knob 932046, 047 932045 Throttle 932046, 047Filling Fuel Tank Starting and Shut OFF PRE-STARTTo Stop in AN Emergency Snow Removal TravelingTransport Shut OffMaintenance Change Engine OIL Check Tire PressureCheck Auger Gearcase General LubricationService and Adjustments Scraper BladeRunners Shear BoltsRemove Attachment Drive Belt Speed Selector AdjustmentAttachment Drive Belt Replacement Brake Adjustment below Replace Attachment Drive BeltAttachment CLUTCH/BRAKE Traction Drive Belt ReplacementAdjustment Attachment Clutch Lever In. 7 15,2 cm 17,8 cm Remove Friction Disc Traction Drive Clutch AdjustmentFriction Disc Replacement Reinstall Friction Disc Replace Friction DiscStorage Service PartsAccessories Troubleshooting Selector Adjustment onSpecifications EngineAriens Limited Warranties Exceptions, Limitations, Exclusions

932045 - ST8524E, 932048 - ST5520, 932046 - ST724E, 932047 - ST5524E specifications

The Ariens brand has long been synonymous with quality and durability in outdoor power equipment, particularly in snow blowers. The models Ariens 932047 (ST5524E), 932046 (ST724E), 932048 (ST5520), and 932045 (ST8524E) each deliver exceptional performance designed to handle a variety of winter conditions.

The Ariens 932047 - ST5524E is particularly well-regarded for its efficient 24-inch clearing width, making it ideal for residential driveways and sidewalks. With a powerful 223cc engine, this model provides ample power to tackle heavy, wet snow. It features a 200-degree chute rotation, which allows for precise snow throwing, enabling users to direct snow exactly where it is needed. The easy-to-use controls make operation simple, even in the harshest weather.

Similarly, the 932046 - ST724E offers a wider clearing width of 24 inches as well, paired with a robust 254cc engine. This model excels in heavy snow conditions, thanks to its deep-set auger design that effortlessly breaks down tough snow layers. The adjustable skid shoes enhance stability and control, while the electric start feature provides convenient starting, even in the coldest temperatures.

The Ariens 932048 - ST5520 is a slightly more compact option, maintaining a 20-inch clearing width and featuring a reliable 223cc engine. This snow blower is perfect for those with tighter spaces to clear, like alleys or smaller driveways. Its lightweight construction makes it easy to maneuver, while still providing the power needed for effective snow removal. The intuitive controls and multiple speed settings provide flexibility for the user.

Lastly, the 932045 - ST8524E stands out with its impressive 28-inch clearing width, making quick work of large areas. The 306cc engine is among the most powerful in the lineup, allowing it to handle even the toughest snowfalls with ease. This model incorporates advanced features like an automatically adjustable auger and impeller, maximizing performance in various snow conditions.

All four models incorporate Ariens’ signature build quality, ensuring long-lasting performance and reliability. With features like reinforced steel construction, adjustable skid shoes, and user-friendly designs, these snow blowers are perfect for tackling winter’s toughest challenges.