Ariens 926042 quick start Quick Start Guide

Page 1

Quick Start Guide

Pro-Track 28 (926042 s/n 75000 & up)

•Step 1: Unfold Handlebar

•Step 2: Install Discharge Chute

•Step 3: Install Chute Control Assembly

•Step 4: Install Discharge Chute Rod

•Step 5: Install Remote Deflector Cable

•Step 6: Check Function of Dual Handle Interlock

•Step 7: Check Track Tension

•Step 8: Adjust Skid Shoes

•Step 9: Check Auger Gearcase Oil

•Step 10: Check Engine Crankcase Oil

•Step 11: Fill Engine Fuel Tank

•Step 12: Start Engine

•Step 13: Stop Engine

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS. IMPORTANT: READ OPERATOR’S MANUAL AND ENGINE MANUAL THOROUGHLY AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.

Image 1

Contents Quick Start Guide Step One Unfold Handlebar Step Two Install Discharge Chute Remove the gear cover from top of chute pedestal Step Three Install Chute Control AssemblyStep Three Install Chute Control Assembly Step Four Install Discharge Chute Rod Step Four Install Discharge Chute Rod Step Five Install Remote Deflector Control Cable Step Six Check Function of Dual Handle Interlock Step Seven Check Track Tension Step Eight Adjust Skid Shoes Step Nine Check Auger Gearcase Oil Step Ten Check Engine Crankcase Oil Step Eleven Fill Engine Fuel Tank Step Twelve Starting the Engine Starting Engine / Step a Throttle Starting Engine / Step B Fuel Valve Starting Engine / Step C Key Starting Engine / Step D Choke Starting Engine / Step E Prime Starting Engine / Step F Manual Start Starting Engine / Step F Electric Start Starting Engine / Step G Electric Start Starting Engine / Step H Warm up Step Thirteen Stopping the Engine Additional Resources