Bushnell 51-0021, 52-0021 Laser Safety Issues, FCC Compliance, Maintenance and Care

LASER SAFETY ISSUES

The BUSHNELL HOLOsight is a Class II laser product. The Class II level illuminating beam, however, is completely blocked by the housing. The only laser light accessible to the eye is the image beam and is at a power level within the limit of a Class II laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair.

FCC COMPLIANCE

The BUSHNELL HOLOsight complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

MAINTENANCE AND CARE

Your BUSHNELL HOLOsight is a precision instrument that deserves reasonably cautious care. The following tips are provided to ensure long lasting use of the sight.

1.The optical system and the window are coated with anti-reflection material. When cleaning the glass surfaces, first blow away any dirt and dust. Fingerprints and lubricants can be wiped off with lens tissue or a soft cotton cloth, moistened with lens cleaning fluid or glass cleaner sold in any camera store.

Never clean the glass surface with a dry cloth or paper towel; always dampen the glass surfaces prior to cleaning.

2.All moving parts of the sight are permanently lubricated. Do not try to lubricate them.

3.No maintenance is needed on the sight’s surface, except to occasionally wipe off with a soft damp cloth. Use only a water-based cleaner such as glass cleaner, ammonia, or soap and water. Never use any solvent-type cleaner such as alcohol or acetone.

4.Never disassemble the sight’s optical assembly. The optical cavity is purged, nitrogen filled, and sealed to achieve fog proof performance. Disassembly will void the warranty.

TWO-YEAR LIMITED WARRANTY

Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1)A check/money order in the amount of $10.00 to cover the cost of postage and handling

2)Name and address for product return

3)An explanation of the defect

4)Proof of Date Purchased

5)Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. SEND TO:	IN CANADA SEND TO:
Bushnell Performance Optics	Bushnell Performance Optics
Attn.: Repairs	Attn.: Repairs
8500 Marshall Drive	25A East Pearce Street, Unit 1
Lenexa, Kansas 66214	Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you may also contact Bushnell

at: BUSHNELL Performance Optics Gmbh European Service Centre

MORSESTRASSE 4 D- 50769 KÖLN GERMANY

Tél: +49 (0) 221 709 939 3

Fax: +49 (0) 221 709 939 8

This warranty gives you specific legal rights.

You may have other rights which vary from country to country. ©2003 Bushnell Performance Optics

6 7