Attaching the Equatorial Mount
The equatorial mount allows you to tilt the telescope’s axis of rotation so that you can track the stars as they move across the sky. The
1.Locate the azimuth adjustment screws on the equatorial mount.
2.Retract the screws so they no longer extend into the azimuth housing (rectangular extrusion) on the mount. Do NOT remove the screws since they are needed later for polar alignment.
3.Hold the equatorial mount over the tripod head so that the azimuth housing is above the metal peg.
4.Place the equatorial mount on the tripod head so that the two are flush.
5.Tighten the knob on the underside of the tripod head to hold the equatorial mount firmly in place. The knob is already attached and can NOT be removed.
Figure
The