6.09 Depress the cleaving lever 3 firmly.
6.10While holding the cleaving lever down, remove the cleaved fiber stubs, and dispose of per company practice.
6.11 Open the cleaving lever and clamping lid.
7.0 Visual Inspection of the Cleave
7.01Install the fiber viewer on the cleaver and rotate the viewer barrel to focus. Observe the cleaved ends of the fiber. If defects are observed, repeat steps 4.05 through 6.11.
Note: For the best viewing results, allow ample light to enter from the top and left side. In dark surroundings use the penlight supplied.
7.02 Properly cleaved fibers.
11