Intel Server Board SE7501CW2 Installation and Integration Guide
Important Safety Information
Safety Instructions and Information
To avoid personal injury or property damage, the following safety instructions apply whenever working inside the chassis:
1.Turn off all peripheral devices connected to this product.
2.Turn off the system by pressing the power button on the front of the product.
3.Disconnect the AC power by unplugging all AC power cords from the system or wall outlet.
4.Disconnect all cables and telecommunication lines that are connected to the system.
5.Retain all screws or other fasteners when removing access cover(s). When finished, refasten the access cover with original screws or fasteners.
6.Do not access the inside of the power supply. There are no serviceable parts in the power supply. If the power supply is malfunctioning, return it to the manufacturer for servicing.
Electrostatic Discharge (ESD)
CAUTION
Perform the procedures in this product guide only at an electrostatic discharge (ESD) workstation, because the server components are extremely sensitive to ESD. If no such workstation is available, you can reduce the risk of electrostatic discharge damage by doing the following:
•Wear an antistatic wrist strap, and attach it to a metal part of the server.
•Touch the metal on the server chassis before touching the server components.
•Keep part of your body in contact with the metal server chassis to dissipate the static charge while handling the components.
•Avoid moving around unnecessarily.
•Hold the server components (especially boards) only by the edges.
•Place the server components on a grounded,
•Do not slide the components over any surface.
8