Intel Server Board SE7501CW2 Installation and Integration Guide
Chassis Preparation and Server Board Installation
About the I/O Shield
An ATX
The shield fits the rectangular opening near the power supply in the back of the chassis. The shield has cutouts that match the external I/O connectors of the server board (such as the keyboard and mouse connectors).
Attaching the Gasket to the I/O Shield
1.Remove the two backing strips from the gasket.
2.Press the gasket onto the inside face of the I/O shield as shown.
Attaching the Label to the I/O Shield
1.Remove the backing from the label included with your server board.
2.Press the label onto the outside face of the I/O shield (A).
Installing the I/O Shield
Install the I/O shield from inside the chassis, with the label facing outward.
1.Insert one edge, and rotate the I/O shield into the chassis cutout.
2.Press firmly until the I/O shield clicks into place.
9