Intel SE7221BK1-E manual Floppy configuration sub-menu, Super I/O configuration sub-menu

SE7221BK1-ETechnical Product Specification

Feature	Options	Help Text	Description
Block (Multi-Sector	Disabled	Disabled: The Data transfer from	The Auto setting should work in
Transfer)	Auto	and to the device occurs one sector	most cases.
		at a time.
		Auto: The data transfer from and to
		the device occurs multiple sectors at
		a time if the device supports it.
PIO Mode	Auto	Select PIO Mode.	The Auto setting should work in
	0		most cases.
	1
	2
	3
	4
DMA Mode	Auto	Selcet DMA Mode.	The Auto setting should work in
	SWDMA0-2	Auto :Auto detected	most cases.
	MWDMA0-2	SWDMA :SinglewordDMAn
	UWDMA0-5	MWDMA :MultiwordDMAn
		UWDMA :UltraDMAn
S.M.A.R.T.	Auto	S.M.A.R.T. stands for Self-	The Auto setting should work in
	Disabled	Monitoring, Analysis and Reporting	most cases.
	Enabled	Technology.
32Bit Data Transfer	Disabled	Enable/Disable 32-bit Data Transfer
	Enabled

9.5.2.3Floppy configuration sub-menu

Table 45. BIOS Setup, Floppy Configuration Sub-menu Selections

Feature	Options	Help Text	Description
Floppy A	Disabled	Select the type of floppy drive	Note: Intel no longer
	1.44 MB 3 1/2"	connected to the system.	validates 720 Kb &
			2.88 Mb drives.
Onboard Floppy Controller	Disabled	Allows BIOS to Enable or
	Enabled	Disable Floppy Controller.

9.5.2.4Super I/O configuration sub-menu

Table 46. BIOS Setup, Super I/O Configuration Sub-menu

Feature	Options	Help Text	Description
Serial Port1 Address	Disabled	Allows BIOS to Select Serial Port1	Option that is used by other serial port
	3F8/IRQ4	Base Addresses.	is hidden to prevent conflicting
	2F8/IRQ3		settings.
	3E8/IRQ4
	2E8/IRQ3

40 Revision 1.3