Intel SE7221BK1-E Post Progress Codes and Messages, Post Code Checkpoints, Languagemoduleerr

		SE7221BK1-ETechnical Product Specification
Error Code	Error Message		Response
	LANGUAGE_MODULE_ERR)
14D	Primary Master Hard Disk Error		Pause
14E	Primary Slave Hard Disk Error		Pause
14F	Secondary Master Hard Disk Error		Pause
150	Secondary Slave Hard Disk Error		Pause
151	Primary Master Drive - ATAPI Incompatible		Pause
152	Primary Slave Drive - ATAPI Incompatible		Pause
153	Secondary Master Drive - ATAPI Incompatible		Pause
154	Secondary Slave Drive - ATAPI Incompatible		Pause
8100	Processor	failed BIST	Warning
8110	Processor	Internal error (IERR)	Warning
8120	Processor	Thermal Trip error	Warning
8160	Processor unable to apply BIOS update		Pause
8170	Processor L2 cache Failed		Pause
8180	BIOS does not support current stepping for Processor		Pause
8190	Watchdog Timer failed on last boot		Warning
8191	12:1 Core to bus ratio: Processor Cache disabled		Pause
8192	L2 Cache size mismatch		Pause
8193	CPUID, Processor Stepping are different		Pause
8194	CPUID, Processor Family are different		Pause
8195	Front Side Bus Speed mismatch. System Halted		Pause
8197	CPU Speed mismatch		Pause
8300	Baseboard Management Controller failed to function		Pause
8301	Front Panel Controller failed to Function		Pause
84F2	Server Management Interface Failed		Pause
84F3	BMC in Update Mode		Pause
84F4	Sensor Data Record Empty		Pause
84FF	System Event Log Full		Warning

9.7.3POST Progress Codes and Messages

9.7.3.1 POST Code Checkpoints

Table 70. POST Code Checkpoints

Checkpoint Description

03Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS, POST, Runtime data area. Also initialize BIOS modules on POST entry and GPNV area. Initialized CMOS as mentioned in the Kernel Variable "wCMOSFlags."

04Check CMOS diagnostic byte to determine if battery power is OK and CMOS checksum is OK. Verify CMOS checksum manually by reading storage area. If the CMOS checksum is bad, update CMOS with power-on default values and clear passwords. Initialize status register A.

Initializes data variables that are based on CMOS setup questions. Initializes both the 8259 compatible PICs in the system

58 Revision 1.3