Eiki LC-SD10 Adjusting the Screen, Zoom Adjustment, Focus Adjustment, Keystone Adjustment

Page 20

Basic Operation

Adjusting the Screen

Zoom Adjustment

Move the Zoom Lever upward / downward to zoom the image.

Tele

Wide

Zoom Lever

Focus Adjustment

Rotate the Focus ring to adjust the projected picture focus.

Focus Ring

Keystone Adjustment

If a projected picture has keystone distortion, correct image with the keystone adjustment.

1

Press KEYSTONE button on the remote control or select

 

Keystone on the Setting menu ( P36 ) to display the Keystone

 

dialog box.

2

Correct keystone distortion by pressing Point ed buttons.

 

Press Point e button to reduce the upper part of image, and

press Point d button to reduce the lower part.

Arrows are white in no correction.

The arrow of direction being corrected turns red.

The arrow disappears at the maximum correction.

If you press the KEYSTONE on the remote control once more while the keystone dialog box is being displayed, the adjustment will be canceled.

Reduce the upper width with Point e button.

Reduce the lower width Point d button.

 

 

 

 

 

 

Picture Freeze Function

Press FREEZE button on the remote control to freeze the picture on- screen. To cancel the freeze function, press FREEZE button again or press any other button.

20

Image 20
Contents Model LC-SD10 To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandMoving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communication Commission NoticeTable of Contents Features and Design Overview FrontBack BottomTop panel Terminals Remote Control Operating RangeConnecting the AC Power Cord PreparationProjector side AC Outlet side For the U.S.A. and Canada For Continental EuropeAdjustable Feet Positioning the ProjectorRemote Control Battery Installation Remove the batteryAttaching the Lens Cover Compartment lidInstallation Connecting to a ComputerTerminals of the Projector Cables used for connectionConnecting to Video Equipment Terminals of the Projector Cables used for connectionVideo Source example Component video output Video Cassette Recorder Video Disc PlayerHow to Operate the On-Screen Menu Respective adjustmentRemote Control Before OperationSetting Menu Input Menu PC Adjust Menu Image Adjust MenuAV System Menu Image Adjust Menu Menu BarTurning Off the Projector Basic OperationTurning On the Projector Adjusting the Screen Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Timer FunctionNo Show Function Direct OperationRGB Computer InputInput Source Selection Auto Mode Computer System SelectionSelecting Computer System Manually SvgaPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HMenu Operation Image Level SelectionDirect Operation Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput Menu VideoWhen the input source is coming from video Input Source Selection Component, RGB Scart 21-pinComponent Equipment connected to the ComputerVideo System Selection Video Jack or S-Video JackComputer in / Component in Jack Y, Pb/Cb, Pr/Cr AutoPicture level adjusted for the picture with fine tone User preset picture adjustment in Image Adjust Menu P34-35Cinema Image button Standard CinemaSharpness ColorTint Progressive Closes the Image MenuProvides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Setting MenuCeiling function Rear function Power management Lamp modeCeiling RearTo change the code of the remote control Remote ControlFactory default To change the code of the projectorUsing the Presentation Remote Control Presentation Remote ControlInstallation Compatible computersMaintenance Lamp ReplacementReplacement Lamp Type No Lamp ReplaceReset the lamp replace counter Lamp Replace CounterThen check the items below Projector is shut down and the Warning indicator lights redTop Control Cleaning the Projection Lens Follow these steps to clean the projection lensCloth. Avoid using an excessive amount of cleaner. Abrasive Air FilterSome displays are not seen during the Operation TroubleshootingProblem No power Image is out of focus Not work ProblemCheck the mouse setting on your computer Indicators and Projector Condition Menu Tree Computer InputVideo Input Settings Main menuSound System Image SelectCompatible Computer Specifications FreqKHz 43.269Technical Specifications Configuration of Terminals Optional PartsCOMPONENT-VGA Cable Type No SCART-VGA Cable Type NoKey to better communications Canada