Eiki LC-SD10 owner manual Screen Size Adjustment

Computer Input

Screen Size Adjustment

This projector has a picture screen resize function, which enables you to display the desirable image size.

1	Press MENU button to display the On-Screen Menu. Press
	Point 7 8 buttons to move the red frame pointer to Screen
	Menu icon.
2	Press Point d button to move the red frame pointer to the
	function that you want to select. Then press SELECT button.

Normal

Provides an image to fit screen size.

True

Provides image in its original size. When the original image size is larger than screen size ( 800 x 600 ), this projector enters “Digital zoom +” mode automatically.

Wide

Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.

Digital zoom +

When Digital zoom + is selected, the On-Screen Menu disappears and the message “D. Zoom +” is displayed. Press SELECT button to expand image size. And press Point ed7 8 buttons to pan the image. The panning function can work only when the image is larger than screen size.

A projected image can be also expanded by pressing D.ZOOM e button on the remote control.

Digital zoom –

When Digital zoom – is selected, the On-Screen Menu disappears and the message “D. Zoom –” is displayed. Press SELECT button to compress image size.

A projected image can be also compressed by pressing D.ZOOM ▼ button on the remote control.

To cancel Digital Zoom +/– mode, press any button except D.ZOOM ed, SELECT and Point buttons.

Screen Menu

SCREEN MENU

Move the red frame to the function and press SELECT button.

Note:

–This Screen Menu cannot be operated when

“720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC System Menu. ( ☞ P23 ).

–True and Digital zoom +/– cannot be selected

when “480i ”, " 575i ", " 480p ", " 575p " is selected on PC System Menu (☞ P23 ).

–This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.

–The image data in other than SVGA (800 x 600) is modified to fit the screen size in initial mode.

–The panning function may not operate properly if the computer system prepared on PC Adjust Menu is used.

29